Bowers & Wilkins M-1 M1/SILVER Benutzerhandbuch
Produktcode
M1/SILVER
AS1
AS2
M-1
PV1
Description
Drive unit
Frequency range
Frequency response
Amplifier
Low-pass filter
Dimensions
Net weight
Finishes
Active vented-box system
1x ø165mm (6.5 in) cone bass
-6dB at 27Hz and 100Hz Music mode
34Hz to 75Hz ±3dB
on reference axis Movie mode
31Hz to 75Hz ±3dB
on reference axis Music mode
on reference axis Movie mode
31Hz to 75Hz ±3dB
on reference axis Music mode
Power output
85W continuous
Rated power
consumption
consumption
120W
Input impedance 100kV
Signal/noise
94dB
Functions
Volume level
Music/Movies switch
Inputs
Line in (RCA Phono)
Speaker level In (Spring Clips)
Outputs
Line out (RCA Phono)
Speaker Level Out (Spring Clips)
Active 2nd-order at 80Hz
Height:
378mm (14.9in)
Width:
215mm (8.5in)
Depth:
385mm (15.2in)
11 kg (24.2 lb)
Black Ash vinyl cabinet with black grille
Silver vinyl cabinet with grey grille
Silver vinyl cabinet with grey grille
Active closed-box subwoofer system
ø250mm (10 in) mica cone
-6dB at 20Hz and 140Hz adjustable (EQ at i)
-3dB 32Hz – 125Hz adjustable (EQ at i)
Power output:
150W continuous
Rated power
consumption
consumption
220W
Input impedance: 22kV
Signal / noise:
>90dB
Functions
Volume level
Low-pass filter frequency
Low-pass filter bypass
Bass roll-off alignment
Auto sense on/standby
Phase switch
Inputs:
Line In (RCA Phono)
Speaker level (binding posts)
Outputs:
Link Out (RCA Phono, parallel to Line In)
Active 2nd-order, variable cut-off frequency
Height:
325mm (12.8 in) not including spike feet
Width:
325mm (12.8 in)
Depth:
393mm (15.5 in) including grille and controls
15.5kg (34 lb)
Black with black cloth grille
Silver with silver cloth grille
Silver with silver cloth grille
Active closed-box subwoofer system
2xø200mm (8 in) mica /
aluminium cone long-throw
aluminium cone long-throw
-6dB at 18Hz and 40/140Hz
adjustable (EQ at i)
adjustable (EQ at i)
±3dB 21Hz – 31/110Hz
adjustable (EQ at i)
adjustable (EQ at i)
Power output:
500W
Rated power
consumption:
consumption:
110W
(105W – 100V version)
Input impedance: 100kV
Signal / noise:
>90dB
Functions:
Volume level
Low-pass filter frequency
Bass roll-off alignment
Auto sense on/standby
Phase switch
Inputs:
Line In (RCA Phono)
Speaker Level In (FCC68 4/4)
Outputs:
Link Out (RCA Phono)
Active 2nd-order, variable cut-off frequency
(applies only to speaker level input)
(applies only to speaker level input)
Height:
335.5mm (13.2 in)
Width:
289mm (11.4 in)
Depth:
347mm (13.7 in)
20.5kg (45 lb)
Gloss black with anthracite trim
Gloss silver with grey trim
Gloss white with chrome trim
Gloss silver with grey trim
Gloss white with chrome trim
Description
Drive unit
Frequency range
Frequency response
Amplifier
Low-pass filter
Dimensions
Net weight
Finishes
Description
Drive units
Frequency range
Frequency response
Dispersion
Sensitivity
Harmonic distortion
Nominal impedance
Crossover frequency
Recommended amplifier power
Max. recommended
cable impedance
cable impedance
Dimensions (wall mounted)
Net weight
Finishes
Dimensions
Total height M-1 on stand
Net weight
Finishes
2-way vented-box system
1x ø25mm (1 in) metal dome
high-frequency
1x ø100mm (4 in) woven glass fibre cone bass /
midrange
high-frequency
1x ø100mm (4 in) woven glass fibre cone bass /
midrange
-6dB at 72Hz and 50kHz
80Hz – 23kHz ±3dB on reference axis
Within 2dB of reference response
Horizontal:
Horizontal:
over 60º arc
Vertical:
over 10º arc
85dB spl (2.83V, 1m)
2nd and 3rd harmonics (90dB, 1m)
<1% 120Hz – 30kHz
<0.5% 250Hz – 22kHz
<1% 120Hz – 30kHz
<0.5% 250Hz – 22kHz
8V (minimum 4.8V)
4kHz
20W – 100W into 8V on unclipped programme
0.1V
Height:
243mm (9.6 in)
Width:
114mm (4.5 in)
Depth:
172mm (6.8 in)
Mounted on table stand
2.7kg (6 lb) including desk stand
Cabinet:
Gloss finish in black,
silver or white
Grille:
Gloss finish in black,
silver or white perforated
steel to match
M-1 Stand
Height:
Height:
957mm (37.7 in)
Base diameter: 250mm (9.9 in)
1085mm (42.7 in)
5.8kg (12.8 lb)
Black, Silver