Honeywell VCU-04 Benutzerhandbuch
![Honeywell](https://files.manualsbrain.com/attachments/04072ac208afe0f60402a9212acd23d57421a7fb/common/fit/150/50/3e168605118cbbd2e280a10aaeca155d86bc5b4c616b0334def9ca6d226c/brand_logo.png)
39
Jumpers
There is a DIP switch (include two bits) in the circle. It is used for
selecting RS-485 matched distance mode.
The Voyager equipment supports biasing and end-of-line termination for
The Voyager equipment supports biasing and end-of-line termination for
the RS-485 network.
a. RS-485 allows the wiring of a multidrop communication
network of up to 1200 m in length. SW1 DIP switches Pin1,
Pin2 set in ON position.
Pin2 set in ON position.
b. RS-485 Port communication network should not exceed 15
m in length. SW1 DIP switches PIN1, PIN2 set in OFF
position.
position.
Figure 26 Jumpers
Jumper
ON/OFF
Function
SW1.1&2
ON
Long distance - up to 1200m
OFF
Short distance - up to 15m