GYENNO Technologies CO. LTD. GO-001W Benutzerhandbuch

Activation 
1. Please take out the smartband,

 

charge docking station, USB Charge 

cable(only for charge use) from package.

 

2. Connect USB charge cable with charge docking station and plugged into PC 
or power adapter USB.

 

Note: The output interface should be 5V500mA.

 

3. Put smartband onto the charge docking station, with “one” logo coming out, 
the device will be activated successfully.

 

 
Connect your phone 
1. Click “one” app on your phone, then the registration screen will be popped 
out. 
2  Input information according to requirements, then the successful registration 
will be popped out. 
3 Enter the appropriate parameters and save them according to the conditions 
of yourself. 

4 The device should be ready to use. Telephone, messaging, calendar, mail, 
alarm will be feedback to the smartband. 

 
Charge: 
1. Place the smartband on the energized charge docking station, then “one” 
logo will be popped out and current charge level will display on the screen(The 
power is full if there is no charge level display)

 

2.The charge level sign will be off when power is full. Remove the smartband 
and continuously click the screen, it will show current charge level.