Powerwerx Inc. TR505 Benutzerhandbuch
TERA
TR-505
24
Wired Clone
1. Turn clone function by programming software or
contact your local dealer.
2. Connect source radio and target radio with clone cable,
and turn target radio on.
3. Hold down [Side Key] on Source Radio, then power
it up. About 3 seconds later, the LED glows red,
which means the Source Radio is ready for cloning.
4. Press [Side Key] on Source Radio again, and the
LED on Source Radio flashes red and LED on Target
Radio flashes green.The LED on Target Radio goes
out when the cloning is finished.
5. Replace the Target Radio with another, then press
[Side Key] on Source Radio to begin cloning.
Tip
If the LEDs on both Source Radio and Target Radio flashes red and green alternatively, it means
the cloning has failed.
Source Radio Target Radio
TERA
TERA