Zenner Performance Meters Inc d.b.a. Zenner USA WM2F Benutzerhandbuch
Stealth Reader MIU User’s Manual Rev 17A
Copyright 2017, Zenner USA
Page 12
Confidential
LED Behavior
When the Stealth Reader is activated, two LED indicators provide visual status information. With a few
exceptions, the Red LED generally provides status information regarding the connection between the Stealth
Reader and the water register; the Green LED provides status information regarding the communication link
between the Stealth Reader and the Fixed Wireless Network.
The following chart identifies the status information a Stealth Reader may provide:
exceptions, the Red LED generally provides status information regarding the connection between the Stealth
Reader and the water register; the Green LED provides status information regarding the communication link
between the Stealth Reader and the Fixed Wireless Network.
The following chart identifies the status information a Stealth Reader may provide:
Red Light
Green Light
Status
Action
Fast Blink
Off
No application firmware installed
Return for service
Off
Fast Blink
Date and Time not set
Proceed with installation, check Stealth
Reader battery and alarm status at end of
installation.
Reader battery and alarm status at end of
installation.
Slow Blink
Active
No register detected
Check register wiring/connections
Fast Blink
Active
• Encoded register: error
reading register
• Pulse register: fewer than 5
pulses received
reading register
• Pulse register: fewer than 5
pulses received
• Encoder: check wiring/connections
• Pulse: may be OK, if possible advance
register to generate several pulses
• Pulse: may be OK, if possible advance
register to generate several pulses
On
Active
• Encoded register: read OK
• Pulse register received 5 or
more pulses
• Pulse register received 5 or
more pulses
See below for actions based on Green LED
Active
Slow Blink
Searching for fixed network
May be OK, but if persists may require
installation of a repeater or additional Stealth
Readers nearby. Neighbor swiping is
recommended.
installation of a repeater or additional Stealth
Readers nearby. Neighbor swiping is
recommended.
Active
Fast Blink
Found fixed network, waiting to
register/re-register.
register/re-register.
May be OK, if persists may require
installation of a repeater or additional Stealth
Readers nearby. Neighbor swiping is
recommended.
installation of a repeater or additional Stealth
Readers nearby. Neighbor swiping is
recommended.
Active
On
Fixed network found and
successfully registered.
successfully registered.
See above for actions based on Red LED
On
On
Fixed network found and
successfully registered
Water register found and
connected
successfully registered
Water register found and
connected
No action, install successful!
On
Off
Status for one second indicates
detected magnet activation
detected magnet activation
No action
Note:
“Active” indicates slow blink, fast blink, or steady on.
“Active” indicates slow blink, fast blink, or steady on.