Lirio Inc. FNXSTHL Benutzerhandbuch

Connect the handset and main phone case with the phone cord.

Connect the LAN port of the phone to the RJ-45 socket of a hub/switch 

or a router (LAN side of the router) using the Ethernet cable.

Connect the 5V DC output plug to the power jack on the phone; plug 

the power adapter into an electrical outlet.

The LCD will display provisioning or firmware upgrade information. 

Before continuing, please wait for the date/time display to show up.

Using the phone embedded web server or keypad configuration 

menu, you can further configure the phone using either a static IP or 

DHCP.

Attach the two wall mount spacers to the slot for wall mount spacers on 

the back of the phone.

Attach the phone to the wall via the wall mount hole.

Pull out the tab on from the handset cradle (See figure below).

Rotate the tab and plug it back into the slot with the extension up to 

hold the handset while the phone is mounted on the wall (See figure 

below).

Installing the Phone (Wall Mount)

PHONE SETUP

For installing the phone on the table with the phone stand, attach the phone 

stand to the bottom of the phone where there is a slot for the phone stand 

(upper part, bottom part).

To setup the FNX-HL, follow the steps below

CONNECTING THE PHONE

Installing the Phone (Phone Stand)

Slot for the phone

stand if placing the

phone on the table

Slot for the wall

mount spacers if

placing the phone

on the wall

Wall mount holes

are available

Tab with extension up

Handset Rest

Tab with extension down

PC Port

LAN Port

Power

Headset Port

Handset Port