Shenzhen ChangTaiWei Electronic CO. LTD M-880 Benutzerhandbuch
communication, do not talk on a channel if someone else is currently talking on it.
To check for activity on a channel before you talk, press and hold
To check for activity on a channel before you talk, press and hold
♪
/MON
. If
you hear static, the channel is clear to use.
Special Features
Interference Eliminator Code
Interference Eliminator Codes help minimize interference by providing you with a choice of code combinations.To set the
code for a channel:
Interference Eliminator Codes help minimize interference by providing you with a choice of code combinations.To set the
code for a channel:
1. Press
until the code starts to flash.
2. Press UP or DOWN
to select the code 0-121 OR 121-0.
3. Press PTT
to save the code setting.
You can set a different code for each channel using this procedure.
Note:
You must set the Interference Eliminator Code to 0
on an FRS radio that
uses Interference Eliminator Codes to communicate with other FRS radios that
do not have Interference Eliminator Codes.
do not have Interference Eliminator Codes.
Push to Talk Timeout Timer
To prevent accidental transmissions and save battery life, the radio emits a
continuous warning tone and stops transmitting if you press PTT
To prevent accidental transmissions and save battery life, the radio emits a
continuous warning tone and stops transmitting if you press PTT
for 180 continuous
seconds.
Special Features
Locking the Keypad
To avoid accidentally changing your radio settings, press and hold
for
3 seconds or until
displays. You can turn the radio on and off, adjust the
volume, receive, transmit, send a call tone, and monitor channels. All other
functions are locked.
functions are locked.
To unlock the radio, press and hold
for 3 seconds or until
is no longer
displayed.
Scanning Channels
Use scanning to monitor channels for transmissions or to find someone in your group who has accidentally changed
channels.
To start scanning, briefly press and release
Use scanning to monitor channels for transmissions or to find someone in your group who has accidentally changed
channels.
To start scanning, briefly press and release
. The scan indicator
displays.
When the radio detects channel activity, it stops scanning and you can hear the
transmission. To respond to the transmission, press PTT
transmission. To respond to the transmission, press PTT
within 5 seconds.
Scan Advance
If the radio stops scanning on a channel you do not want to listen to, briefly press
and release
If the radio stops scanning on a channel you do not want to listen to, briefly press
and release
]
or
[
to resume scanning for the next active channel.
Removing Channels from the Scan List (Nuisance Delete Feature)
To remove a channel so the radio does not stop on it while scanning, press and
hold UP or DOWN
To remove a channel so the radio does not stop on it while scanning, press and
hold UP or DOWN
for at least 3 seconds, then release. This temporarily removes the
channel from the scan list.
To restore the channel, turn the radio off and then back on.
To restore the channel, turn the radio off and then back on.
Note:
You cannot remove the channel your radio was set to when you started
the scan (called your home channel).
Alerts
Setting and Transmitting Call Tones
Your radio can transmit different call tones to other radios in your group so you
Your radio can transmit different call tones to other radios in your group so you