Sato Vicinity Pty Ltd MDR-3021AT Benutzerhandbuch
MDR-3021AT USER MANUAL
21
79-00-001-DOC
3.4.5 Changing the Reader’s Network Setup
Ensure the Reader is connected as described above. From the Tools menu, select System then
Configuration System as shown at 3.3.4 above. The Configuration System window will open. Select
the “Network Configuration” tab as shown below. By default the reader is set to obtain an IP address
from a DHCP server. If this is not desired un-tick the “Obtain an IP address automatically” check box
and enter the required IP Address, Subnet mask & Default Gateway. Press the “Enter” key on your
keyboard then Click the “ Save” button to the right to save your changes to the reader. Power
cycle the reader for the change to take effect.
Configuration System as shown at 3.3.4 above. The Configuration System window will open. Select
the “Network Configuration” tab as shown below. By default the reader is set to obtain an IP address
from a DHCP server. If this is not desired un-tick the “Obtain an IP address automatically” check box
and enter the required IP Address, Subnet mask & Default Gateway. Press the “Enter” key on your
keyboard then Click the “ Save” button to the right to save your changes to the reader. Power
cycle the reader for the change to take effect.
Configuration System “Network Configuration” window
!
Ensure the IP address allocated to the reader is recorded for future reference.
Applying a label to the reader showing the allocated IP address is ideal.
Tip: If you make an error in the reader Network configuration the reader may no
longer be visible on the network (wrong IP range for example). If this happens you
can connect to the reader using a USB cable & correct the issue
can connect to the reader using a USB cable & correct the issue