Wedge-it.com Ltd HHR1 Benutzerhandbuch

 

Introduction 

Congratulations on becoming the owner of the Wireless 
Gateway. You will now be able to access the Internet using your 
high-speed xDSL/Cable modem connection. 

This User Guide will show you how to connect your Wireless 
Gateway, and how to customize its configuration to get the most 
out of your new product. 

The list below contains the main features of the device and may 
be useful to users with knowledge of networking protocols. If 
you are not an experienced user, the chapters throughout this 
guide will provide you with enough information to get the most 
out of your device. 

Features include: 

• 

10/100Base-T Ethernet router to provide Internet 
connectivity to all computers on your LAN 

• 

Network address translation (NAT) functions to provide 
security for your LAN 

• Network 

configuration 

through DHCP Server and DHCP 

Client 

• 

Services including IP route and DNS configuration, RIP, 
and IP 

• 

Supports remote software upgrades 

• 

User-friendly configuration program accessed via a web 
browser 

 
The Wireless Gateway has the internal Ethernet switch  
allows for a direct connection to a 10/100BASE-T Ethernet  
network via an RJ-45 interface, with LAN connectivity for  
both the Wireless Gateway and a co-located PC or other  
Ethernet-based device. 

In order to use the Wireless Gateway, you must have the 
following: 

•  One RJ-45 Broadband Internet connection via cable 

modem or xDSL modem 

•  Instructions from your ISP on what type of Internet access 

you will be using, and the addresses needed to set up access 

•  One or more computers each containing an Ethernet card 

(10Base-T/100Base-T network interface card (NIC)) 

•  TCP/IP protocol for each PC 
•  For system configuration using the supplied  

a. web-based program: a web browser such as Internet 
Explorer v4 or later, or Netscape v4 or later. Note that 
version 4 of each browser is the minimum version