Vubiq Networks Inc. V10G-L Benutzerhandbuch
23
Vubiq HaulPass V10g User Manual
© 2018 Vubiq Networks, Inc. All Rights Reserved
5.2 Changing the IPv4 Address
Changing the Address via the Webpage
Log in to the terminal with an account that has administrative privileges. On the menu on the left side of the screen
select Configuration System IP.
select Configuration System IP.
In the IPv4 field enter the new address and then press the Save button.
The terminal’s IPv4 address will change
immediately when the Save button is pressed and you will lose your webpage connection to the terminal. Change
your browser’s destination to the new IPv4 address and log in again using an account that has administrative
privileges.
your browser’s destination to the new IPv4 address and log in again using an account that has administrative
privileges.
After logging in the configuration must be saved as the Startup-Configuration to retain the new IPv4 address through
a reboot or power cycle. You will be able to confirm that the startup-config needs to be saved by way of an
informational message in the upper right corner of the webpage.
a reboot or power cycle. You will be able to confirm that the startup-config needs to be saved by way of an
informational message in the upper right corner of the webpage.
On the left side menu choose Maintenance Configuration Save startup-configuration.
Press the Save Configuration button. You will receive a confirmation that the startup-config was saved successfully.