Vubiq Networks Inc. V10G-L Benutzerhandbuch
54
Vubiq HaulPass V10g User Manual
© 2018 Vubiq Networks, Inc. All Rights Reserved
9.3 MSTI Priorities
Each MSTI and CIST can be given a priority.
Figure 37. MSTI Priority Configuration
A low priority number indicates higher priority.
A Bridge Identifier
is constructed per CIST, MSTI1,…,MSTI7, the bridge priority number. This is concatenated with
the MAC address of the switch. In this way the bridge Identifier is unique.
A low bridge Identifier indicates a higher priority. A high priority means that the switch tends to be the root of the
spanning tree. If two switches have the same bridge priority, then for example, setting MSTI1 priority higher, or
setting MSTI2 lower, makes one switch tends the root.
spanning tree. If two switches have the same bridge priority, then for example, setting MSTI1 priority higher, or
setting MSTI2 lower, makes one switch tends the root.
9.4 STP CIST Port Configuration
STP is configured on a port basis in the web GUI at Configuration > Spanning Tree > CIST Ports.
Figure 38. STP CIST Port Configuration