Vubiq Networks Inc. V10G-L Benutzerhandbuch
63
Vubiq HaulPass V10g User Manual
© 2018 Vubiq Networks, Inc. All Rights Reserved
Web GUI example:
MIB: vubiqRfRxFecErrors
OID: .1.3.6.1.4.1.46330.2.2.1.23.0 (Counter32)
MIB: vubiqRfRxUncorrectableErrors
OID: .1.3.6.1.4.1.46330.2.2.1.6.0 (Integer)
freq (Rx frequency setting (GHz))
The rf rx freq command will tell the user which frequency the Vubiq HaulPass V10g terminal is receiving at. The
receiver and transmitter frequencies must be different and the terminal at the other end of the link must reverse
those frequencies in order to have a link between them. Transmitting at 57.78 GHz makes the terminal a “Low” and
transmitting at 64.26 GHz makes the terminal a “High”.
receiver and transmitter frequencies must be different and the terminal at the other end of the link must reverse
those frequencies in order to have a link between them. Transmitting at 57.78 GHz makes the terminal a “Low” and
transmitting at 64.26 GHz makes the terminal a “High”.
CLI example:
# rf rx freq
64.26
# rf tx freq
57.78
#
64.26
# rf tx freq
57.78
#