Zeeva International Limited ET-0066 Benutzerhandbuch

Seite von 1
Warning
Specifications
Remote
Standard Control
Power On/Off
Flip Action
Standard Control
Package Contents
Product Overview
Care and Maintenance
Performance Tips
FCC Statement
This device complies with the part 15 of the FCC rules. Operation is subject to the 
following two conditions:(1) this device may not cause harmful interference, and (2) 
this device must accept any interference received, including interference that may 
cause undesired operation.
Caution: changes or modifications not expressly approved by the party responsible 
for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in accordance with instructions may 
cause harmful interference to radio or television reception, which can be determined 
by turning the equipment off and on. The user is encouraged to try to correct the 
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected.
• Consult the dealer or experienced radio/ TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The 
device can be used in portable exposure condition without restriction.
1. TO AVOID BATTERY LEAKAGE
a. Always follow the instructions carefully. Use only batteries specified and be sure to 
insert them correctly by matching the + and - polarity markings.
b. Do not mix old batteries and new batteries or standard (carbon-zinc) with alkaline 
batteries.
c. Remove exhausted or dead batteries from the product.
d. Remove batteries if product is not to be played with for a long time.
e. Do not short-circuit the supply terminals.
2. Should this product cause, or be affected by local electrical interference, move it 
away from other electrical equipment.Reset ( switching ON&OFF again or removing 
and re-inserting batteries) if necessary.
IMPORTANT: BATTERY INFORMATION
CAUTION:
Keep All Relevant Information for Future Reference
Batteries Installation
Instruction Manual
Thank you for purchasing the Amphibious RC Car.
This manual provides more information about this RC Car, 
please read the instructions before using.
8+
Amphibious RC Car x 1
Remote Control x 1
Instruction Manual x 1
Power supply: 4 x “AA”  1.5V Batteries 
(alkaline type preferred, not included)
Power supply: 3 x “AAA”  1.5V Batteries 
(alkaline type preferred, not included)
Remote:
Frequency: 27.145 MHz
Remote Control
Note: To avoid losing control, always pay attention when controlling 
the RC Car.
Control Amphibious RC Car to move forward
Forward Button
Control Amphibious RC Car to move backward
Backward Button
Control Amphibious RC Car to turn left
Left Button
Control Amphibious RC Car to turn right
Drive Amphibious RC Car in front of vertical flat surface,
Keep Pressing Forward Button, Amphibious RC Car will perform
360 Flip Stunt!
Right Button
Forward / Backward
Button
Left / Right
Button
This product is suitable to be used by people who has operating 
experience in remote toy or aged no less than 8 years old.
Please do not immerse the whole Amphibious RC Car into the water as 
this may cause ingress of water and malfunction. 
Please play the Amphibious RC Car only in palm water or land. This 
toy is not suitable for playing in sea, river or other area with turbulence 
flow of water.
Please do not put the product in your mouth to prevent choking hazard 
of small parts.
Please do not put the finger into available interspaces.
Please do not play the product in a brutal way such as throwing, 
crashing or twisting it. 
Please store the smaller-sized product accessories in places that are 
out of reach of children, in order to avoid the occurrence of accidents.
Avoid placing the batteries in places in high temperatures and avoid 
exposure to heat.
When young children are operating the product, it shall be ensured that 
the adults are guiding and making sure the product control is within the 
viewing range of the controller (or instructor) so that it makes the 
control of the toy more convenient.
When the product is not in use, please switch off the power supplies of 
the toy, and remove the batteries from the product.
Please note that we won’t take any responsibility for any wrong 
operation as this may result in severe injury or loss of property, and we 
cannot control the operating process during the time when the user 
assembles or uses this product.
Once this product is sold, we won’t be responsible for any safety 
responsibility during the time the user operates or uses controls this 
products.
Always use dry and soft cloth to clean this product.
Avoid this product from being exposed to heat.
Check the product regularly. If any damages are discovered, please stop using 
immediately, until it is completely repaired in good working condition.
After the Amphibious RC Car has been running on the water, there is a chance that 
a small amount of water can flow into the wheel. This is not harmful to the 
Amphibious RC Car. 
It is recommended to use absorbent cloth or paper for wiping the water on the 
housing. Then hold the body of the Amphibious RC Car with hand and operate the 
wheels to roll forward and backward in order to spin out the water inside the wheels. 
Then put the car on a piece of absorbent cloth to allow the residual water inside the 
wheels to drain out gradually.
1. Do not drive the Amphibious RC Car on grass.
2. Do not drive the Amphibious RC Car in windy weather.
3. Do not drive the Amphibious RC Car into any sharp object.
4. Keep fingers, hair and loose clothing away from Amphibious RC Car.
When inserting the batteries, you must insert according to the correct polarity,
the Amphibious RC Car won’t function if batteries are reversed.
When open or close the cover, please do not destroy the ‘housing seal’ and
keep it in its place, otherwise the Amphibious RC Car may have ingress of 
water and cause malfunction.
Notice:
To install batteries into the Amphibious RC Car, unscrew the screws on the 
battery box cover to open the cover. Insert 4 x “AA” 1.5V batteries (Not Included) 
into the battery box. Batteries should be placed as shown on the diagram.
Replace the battery box cover and tighten the screws.
When inserting the batteries, you must insert according to the correct polarity,
the Amphibious RC Car Remote won’t function if batteries are reversed.
Notice:
To install batteries into the Amphibious RC Car Remote, unscrew the screw on the 
battery box cover to open the cover. Insert 3 x “AAA” 1.5V batteries (Not Included) 
into the battery box. Batteries should be placed as shown on the diagram. 
Replace the battery box cover and tighten the screw.
Power On/Off
Slide the ON/OFF Switch to ON to turn on the Amphibious RC Car.
Slide the ON/OFF Switch to OFF to turn off the Amphibious RC Car.
Instruction Manual
Instruction
Manual
Batteries Installation
Power On / Off
OFF
ON
Made Exclusively for Five Below
Distributed by Zeeva International Limited
Suite 1006C-8, 10th Floor, Exchange Tower, 
33 Wang Chiu Road, Kowloon Bay,
Hong Kong, China
Amphibious RC Car 
Amphibious RC Car: 
FCC ID: 
2ADM5-ET-0066