Zeeva International Limited VF50012BT Benutzerhandbuch

• MULTI FUNCTION Button: Press to play or pause a track

• Quickly press the next track/volume up button to increase 

the volume.

• Quickly press the previous track/volume down button to 

decrease the volume.

• Press and hold the next track/volume up button to advance 

to the next song in a playlist.

• Press and hold the the previous track/volume down button 

to go back to the previous song in a playlist.

The LED indicator light will slowly blink blue every few 

seconds during music play.

Note: You can also adjust volume and playback settings on 

your phone or connected audio device.

•Answering a Call: Quickly press the MULTI FUNCTION 

button to answer an incoming call.

•Ending a Call: Quickly press the MULTI FUNCTION button 

to end a call.

•Redial: Double tap the MULTI FUNCTION button to redial 

a call.

•Reject Call: Press and hold the MULTI FUNCTION button to 

reject the call.

Note: The phone function can only be used when there is a 

Bluetooth connection between your headphones and phone.

Your headphones have a built-in, rechargeable lithium-ion 

battery. To avoid damage, do not attempt to remove the 

battery. The full performance of the battery is only achieved 

after a few charging-discharging cycles. Charge the battery 

fully before first use. To do so, follow the steps below:

1. Connect one end of the included Micro USB charging 

cable to the Micro USB charging port on your headphones. 

Then plug the other end of the Micro USB charging cable 

into a USB port on your computer or a suitable power 

adapter to recharge the internal rechargeable battery.

NOTE: The internal battery of your headphones takes 

approximately 2 hours to charge when completely drained. 

To maximize performance, it is recommended to charge the 

battery for six hours before initial use.

2. When the battery is charging, the LED indicator light will 

turn red. The LED indicator light will turn blue when the 

battery is fully charged. Unplug when charging is complete.

NOTE: Overcharging could reduce the life of the battery. 

A charged battery will lose its capacity if it is not used on a

regular basis.

Important

To avoid a complete discharge of the battery, charge your

headphones at least once every six months.

 

Changes or modifications not expressly approved by the party 

responsible for compliance could void the user’s authority to operate the 

equipment.

 

This device complies with Part 15 of the FCC Rules. Operation is subject 

to the following two conditions: (1) this device may not cause harmful 

interference, and (2) this device must accept any interference received, 

including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a 

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits 

are designed to provide reasonable protection against harmful 

interference in a residential installation. This equipment generates, uses 

and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference to radio 

communications. However, there is no guarantee that interference will not 

occur in a particular installation.

If this equipment does cause harmful interference to radio or television 

reception, which can be determined by turning the equipment off and on, 

the user is encouraged to try to correct the interference by one or more of 

the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to    

    which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

FCC ID# 2ADM5-VF50012BT

This warranty covers the original consumer purchaser only 

and is not transferable.

This warranty covers products that fail to function properly 

UNDER NORMAL USAGE, due to defects in material or 

workmanship. Your product will be repaired or replaced at 

no charge for parts or labor for a period of one year.

Damages or malfunctions not resulting from defects in 

material or workmanship and damages or malfunctions from 

other than normal use, including but limited to, repair by 

unauthorized parties, tampering, modification or accident.

Call 1-800-592-9541 in the U.S. or 0-800-917-4831 in the 

UK or visit our website at www.vivitar.com.

To receive Warranty service along with the name and 

address of an authorized product service center, the original 

consumer purchaser must contact us for problem 

determination and service procedures. Proof of purchase in 

the form of a bill of sale or receipted invoice, evidencing that 

the product is within the applicable Warranty period(s), 

MUST be presented in order to obtain the requested 

service. It is your responsibility to properly package and 

send any defective products along with a dated copy of 

proof of purchase, a written explanation of the problem, and 

a valid return address to the authorized service center at

your expense. Do not include any other items or accessories 

with the defective product. Any products received by the 

authorized service center that are not covered by warranty 

will be returned unrepaired.

NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, 

INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED 

WARRANTIES OF MERCHANTABILITY OR FITNESS FOR 

A PARTICULAR PURPOSE, OTHER THAN THOSE 

EXPRESSLY DESCRIBED ABOVE SHALL APPLY. 

DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES 

AFTER THE EXPRESS WARRANTY PERIOD STATED 

ABOVE. NO OTHER EXPRESS WARRANTY OR 

GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY 

WITH RESPECT TO THE PRODUCT SHALL BE BINDING 

ON DISTRIBUTOR. REPAIR, REPLACEMENT, OR 

REFUND OF THE ORIGINAL PURCHASE PRICE - AT 

DISTRIBUTOR’S SOLE DISCRETION -ARE THE 

EXCLUSIVE REMEDIES OF THE CONSUMER. IN NO 

EVENT WILL DISTRIBUTOR, ITS MANUFACTURERS, OR 

SAKAR INT. BE LIABLE FOR ANY INCIDENTAL, DIRECT, 

INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL 

DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES 

FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR 

RECORDS) CAUSED BY THE USE, MISUSE OR 

INABILITY TO USE THE PRODUCT. EXCEPT AS STATED 

HEREIN, NO OTHER WARRANTIES SHALL APPLY. 

NOTWITHSTANDING THE FOREGOING, CONSUMER’S 

RECOVERY AGAINST DISTRIBUTOR SHALL NOT 

EXCEED THE PURCHASE PRICE OF THE PRODUCT 

SOLD BY DISTRIBUTOR. THIS WARRANTY SHALL NOT 

EXTEND TO ANYONE OTHER THAN THE ORIGINAL 

CONSUMER WHO PURCHASED THE PRODUCT AND IS 

NOT TRANSFERABLE.

This product is manufactured, distributed and sold by 

SAKAR International, Inc. All other trademarks are the 

property of the respective owner, who has not sponsored, 

endorsed or approved this product.

When using your Vivitar Bluetooth Headphones basic safety 

precautions should always be followed, including the 

following:

1. READ ALL INSTRUCTIONS BEFORE USING YOUR 

HEADPHONES.

2. Do not use your headphones near water. Clean using a 

soft cloth or paper towel.

3. Do not place your headphones on any wet surfaces.

4. Do not allow children or the infirm to play with your 

headphones without adult supervision.

5. Do not expose your headphones to excessive heat, flames 

or fire.

6. Always press all buttons carefully. Do not manhandle your 

headphones.

7. Do not use in extremely dry environments, as this can lead 

to static discharge during usage.

8. Do not expose your headphones to temperatures above 

40°C. Keep out of direct sunlight.

9. Do not attempt to repair this product yourself. Contact a 

qualified service center if your headphones is in need of 

service.

10.Do not drop, puncture or expose your headphones to 

excessive trauma.

11. Your headphones are not intended for commercial use.

12. Do not place near objects that generate a strong magnetic 

field.

13.  Use only the supplied chargers and cables. Unplug this 

device when not in use for long periods of time or during 

lightning storms.

Bluetooth Version: 4.2

Transmission Frequency Range: 20Hz-20KHz 

Bluetooth Range: Up to 32.8 feet (10 meters) 

Bluetooth Playing Time: Approximately 4 Hours 

Standby Time: Approximately 6 Hours

Charge Time: Approximately 2 Hours 

Battery Type: 300mAh 3.7V Lithium-Ion Battery 

Driver Diameter: 40mm

 

Your headphones can be paired with most Bluetooth 

devices including iPads, iPhones, iPod Touch, and most 

smartphones, laptops and tablets. To pair your headphones 

with a phone, follow the steps below:

1. Press and hold Multi-function button until your 

headphones power on.  Once your headphones are 

powered on, the LED indicator light will alternately flash blue 

and red, blinking rapidly. This indicates that your 

headphones are in pairing mode.

2. Go to the Bluetooth Manager of your Bluetooth device.

3. Search Bluetooth devices and select “

Viv headphone

” to 

start connecting.

4. Enter “0000” if your device asks for the PIN code.

5. Once paired, the LED indicator light will stop blinking and 

steadily shine blue. Note that anytime music is playing, the 

LED indicator light will slowly blink blue every few seconds.

ITEM #: VF50012BT

Micro USB 

Charging Cable

Instruction

Manual with

Warranty Info.

VF50012BT Bluetooth 

Headphones

Microphone

Micro USB

Charging Port

LED Indicator Light

Next Track / Volume Up

Previous Track / Volume Down

MULTI FUNCTION Button

Thank you for purchasing your Vivitar Bluetooth 

Headphones, item 

VF50012BT

. You can use your 

headphones with iPads, iPhones, iPods and many other 

types of smartphones and Bluetooth devices to stream 

music and enjoy hands-free calling. To get the best 

results, please read this manual first before using your 

device. 

-Before using your headphones, inspect the ports and 

jacks to make sure that they are clear of dust and debris.

-Use a soft cloth to clean your headphones. Never use any 

harsh chemicals or detergents. Make sure your 

headphones are dry before using.

-When your headphones are not in use, it should be stored 

in a cool, dry place.

-Never tug or yank on the USB cable while they are 

connected to your headphones. Connect and disconnect 

these cables as carefully as possible.

-Never expose your headphones to high temperatures, 

extreme cold, high humidity or excessive moisture or 

water.

-Please recycle or dispose of your headphones properly 

based on the laws and rules of your municipality. Contact 

local recycling facilities and/or the manufacturer of your 

earbuds for further information.

50mm

86mm