Trident Communication Technology LLC MC1V2 Benutzerhandbuch
Part No: MC1 Reference Guide v2.0
4
Battery Extraction
1.
Pivot Headset Module 45 degrees downward until it stops.
2.
Remove Battery from Bluetooth Headset Module.
Connecting Headset to Device
To use the ModCom One Headset with a Bluetooth Device (or “Host”), such as a mobile computer or
industrial tablet, you must first establish a wireless connection between the Headset and the intended
Device. This process is called “Pairing”.
industrial tablet, you must first establish a wireless connection between the Headset and the intended
Device. This process is called “Pairing”.
Pairing
The Headset may be paired with Bluetooth devices in the following three ways:
1. Touch‐to‐Pair with devices supporting an NFC Connection.
2. Scan‐to‐Pair with devices supporting Bluetooth Mac Address Scanning.
3. Standard Bluetooth pairing where the headset is discovered by the Host.
Headset must be within close proximity of the host to complete pairing. To initiate pairing, Headset
must be powered off. If the headset is on, turn off by pressing the Multi‐Function Button (MFB) for 2
seconds. Initiate headset pairing by pressing the Multi‐Function Button for 7 seconds until you hear
“Pairing” and the LED alternately flashes red and blue.
1. For Touch‐to‐Pair, touch Headset NFC tag, located in the microphone assembly, to NFC tag of Host.
2. For Scan‐to‐Pair, activate Host scanning function and scan Headset Bluetooth Mac Address Barcode
1. Touch‐to‐Pair with devices supporting an NFC Connection.
2. Scan‐to‐Pair with devices supporting Bluetooth Mac Address Scanning.
3. Standard Bluetooth pairing where the headset is discovered by the Host.
Headset must be within close proximity of the host to complete pairing. To initiate pairing, Headset
must be powered off. If the headset is on, turn off by pressing the Multi‐Function Button (MFB) for 2
seconds. Initiate headset pairing by pressing the Multi‐Function Button for 7 seconds until you hear
“Pairing” and the LED alternately flashes red and blue.
1. For Touch‐to‐Pair, touch Headset NFC tag, located in the microphone assembly, to NFC tag of Host.
2. For Scan‐to‐Pair, activate Host scanning function and scan Headset Bluetooth Mac Address Barcode
Label.