Bonfire Acoustic MM2B Benutzerhandbuch
KOREAN
KOREAN
Component verification
Safety and Warranty Statement
Playing the AUX
1. Press the Power/Bluetooth [
] button
repeatedly until the lamp will be displayed
in red.
in red.
2. From the AUX device connected, execute
the music play function. The speakers start
to emit audible sounds
to emit audible sounds
Volume control
Press the
Volume [+]/[-] button located at the
top of the speaker to increase or decrease the
sound volume.
sound volume.
Troubleshooting
When the speakers don't produce any
sound
Check whether the adapter is firmly connected
to the speaker and the outlet.
Check whether the lamp located at the top of
the right speaker has turned red to verify that
the speaker is turned on.
Check whether the speaker volume is set to off.
To increase the volume, press the [
to the speaker and the outlet.
Check whether the lamp located at the top of
the right speaker has turned red to verify that
the speaker is turned on.
Check whether the speaker volume is set to off.
To increase the volume, press the [
+] button on
the right speaker.
Check whether external device is plugged into a
power source and is turned on, and the volume
is set to at least two thirds of the maximum
volume level.
Check whether the audio input cable is con-
nected to the audio input [AUX IN] terminal of
the speaker and the audio output terminal of
the external device correctly.
Check whether external device is plugged into a
power source and is turned on, and the volume
is set to at least two thirds of the maximum
volume level.
Check whether the audio input cable is con-
nected to the audio input [AUX IN] terminal of
the speaker and the audio output terminal of
the external device correctly.
When one of the speakers does not pro-
duce a sound
Check whether the speaker cable is connected
to both the speakers firmly.
to both the speakers firmly.
Product registration
Connecting/Playing a Bluetooth
1. Press the Power/Bluetooth [
] button
repeatedly until the lamp will be displayed
in blue.
If you do not have a registered device, the
lamp will flash blue. Searches for Bluetooth
devices in the device to be registered, and
then select the product "
in blue.
If you do not have a registered device, the
lamp will flash blue. Searches for Bluetooth
devices in the device to be registered, and
then select the product "
MM2B" / connect.
If the registered device is ready, while the
lamp is lit in blue will blink automatically.
lamp is lit in blue will blink automatically.
2. From the Bluetooth device connected,
execute the music play function.
3. If you press the Power/Bluetooth [
] but-
ton when the speakers are connected with
other external device, the external device
comes to be in Play mode.
other external device, the external device
comes to be in Play mode.
Speakers
Power adapter with plug
Carrying case
User's manual
Sound cable
Speaker cable
Getting Started
Connecting/Disconnecting the power
1. Put the plug that meets the local standards in
the power adapter and push it to be plugged.
Press and push upwards the lock to remove the
plug from the power adapter.
plug from the power adapter.
2. Connect between the product's power ter-
minal and the household outlet using the
power adapter.
power adapter.
To remove the power from the product, remove
the power adapter from the outlet and the prod-
uct's power terminal.
the power adapter from the outlet and the prod-
uct's power terminal.
Turning On/Off
1. When the power adapter is plugged to the
outlet, the unit turns the standby mode.
2. When you press and hold the Power [ ] but-
ton in Play mode, the speakers are turned off.
[Product-related]
Warning! Failure to observe safety precautions may
result in injury or death.
Be careful when using the speakers and the power adapter.
•Pleaseuseonlygenuinepoweradapters.
•Storeormanagethespeakersandthepoweradapt-
Warning! Failure to observe safety precautions may
result in injury or death.
Be careful when using the speakers and the power adapter.
•Pleaseuseonlygenuinepoweradapters.
•Storeormanagethespeakersandthepoweradapt-
ers in a manner that does not cause impact, flood-
ing, heat, breakage, bending or pressing.
ing, heat, breakage, bending or pressing.
•Plugthepoweradapterproperlytopreventitfrom
being loose, and do not bend, twist or cut the cable
connected.
connected.
•Incaseofdamagesordeformationofthepower
adapter, stop using it and dispose of it safely.
•Thepowersupplyunitmaybecomehotduringthe
normal use. Do not put it on a heat-sensitive surface.
Be careful not to cause the product to be wet.
•Youmustnottouchtheproductorthepower
•Youmustnottouchtheproductorthepower
adapter with a wet hand.
•Donotusetheproductandthepoweradapterinan
environment in which they may come into contact
with a liquid.
with a liquid.
•Iftheproductiswetdamaged,stopusingitim-
mediately and remove the product and the power
adapter.
adapter.
•Iftheproductiswetdamaged,donotleaveit
alone for a long period of time or dry it by any
arbitrary way such as a hand dryer or a microwave.
Instead, contact or visit our repair service center as
soon as possible.
arbitrary way such as a hand dryer or a microwave.
Instead, contact or visit our repair service center as
soon as possible.
•Warrantydoesnotapplytoawetdamagedproduct,
and repair may be impossible or impractical.
Attention! Failure to observe safety precautions may
result in minor injury or property damages such as
product malfunction.
Do not drop or apply impact.
•Theappearanceorinternalpartsoftheproductmay
result in minor injury or property damages such as
product malfunction.
Do not drop or apply impact.
•Theappearanceorinternalpartsoftheproductmay
be damaged, and other failures may occur.
•Storetheproductinasafeplacewithaflatand
unsloped surface.
Do not disassemble, modify or repair the product arbitrarily.
•Donotchangethesystemorparts.
•Modificationwithoutourpermissionmaycause
•Donotchangethesystemorparts.
•Modificationwithoutourpermissionmaycause
safety issues, nonconformance to statutory regula-
tions and system performance. In this case, warranty
does not apply, and is invalidated.
tions and system performance. In this case, warranty
does not apply, and is invalidated.
Use the product, power adapter and other accessories for
their originally intended purposes.
•Failures,damagesorotherunexpectedaccidents
their originally intended purposes.
•Failures,damagesorotherunexpectedaccidents
may occur.
[Cleaning the speakers]
Clean the speakers carefully using only a soft and dry
cloth.
•Donotspillliquidonthespeakersortheventofeach
Clean the speakers carefully using only a soft and dry
cloth.
•Donotspillliquidonthespeakersortheventofeach
speaker.
•Donotuseanabrasive,liquidorsprayonthespeak-
ers or the speaker grill.
[FCC Statement]
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received,
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
operation.
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user's authority to operate the equipment.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•Reorientorrelocatethereceivingantenna.
•Increasetheseparationbetweentheequipmentand
the party responsible for compliance could void the
user's authority to operate the equipment.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•Reorientorrelocatethereceivingantenna.
•Increasetheseparationbetweentheequipmentand
receiver.
•Connecttheequipmentintoanoutletonacircuitdif-
ferent from that to which the receiver is connected.
•Consultthedealeroranexperiencedradio/TVtechni-
cian for help.
[FCC Radiation Exposure Statement]
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled and operated with
minimum distance 20Cm between the radiator & your
body.
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled and operated with
minimum distance 20Cm between the radiator & your
body.
[IC Warning]
This device complies with industry Canada licence-
exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including
This device complies with industry Canada licence-
exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of
device.
device.
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user's authority to operate equipment.
the party responsible for compliance could void the
user's authority to operate equipment.
[IC Avertissement]
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de li-
cence. L'exploitation est autorisée aux deux conditions
suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouil-
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de li-
cence. L'exploitation est autorisée aux deux conditions
suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouil-
lage radioelectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
susceptible d'en compromettre le fonctionnement.
[Specification]
•Color:Silver/Black
•Size:128x114x70.5mm(HxDxW)
•Weight:0.45kgx2EA
•Outputpower:8W/CH@1kHz450mV
•THD:0.10%@1kHz450mV
•BluetoothVersion:4.0
•Color:Silver/Black
•Size:128x114x70.5mm(HxDxW)
•Weight:0.45kgx2EA
•Outputpower:8W/CH@1kHz450mV
•THD:0.10%@1kHz450mV
•BluetoothVersion:4.0
© 2014 by BONFIRE ACOUSTIC ALL RIGHTS RESERVED.
Any use of materials on this website, including reproduc-
tion, modification, distribution or republication, without
thepriorwrittenconsentofBONFIREACOUSTIC,isstrictly
prohibited.
Any use of materials on this website, including reproduc-
tion, modification, distribution or republication, without
thepriorwrittenconsentofBONFIREACOUSTIC,isstrictly
prohibited.
➊Connectthespeakercabletotheotherspeaker.
➋Connecttheaudiocable(AUXIN)totheexternal
➋Connecttheaudiocable(AUXIN)totheexternal
audio device.
➌Connecttheplugofthepoweradapterinto
a household outlet, then the indicator lamp is
displayed in red. Do not plug in the power adapt-
er until all other connections are completed.
displayed in red. Do not plug in the power adapt-
er until all other connections are completed.
The actual components may differ from the picture, and some items may be changed.
It is recommended to use a surge protector ap-
proved by safety authorities for all electronic devices.
proved by safety authorities for all electronic devices.
Youcanregisteryourproductathttp://www.bfna.kr.
Youcanfindtheproductserialnumberatthebottom
of the right speaker and on the customer warranty
card.
of the right speaker and on the customer warranty
card.
Serial Number:
ModelName:
(marked on the label at the button of the speaker)
Please fill in the information and keep it.
BONFIRE ACOUSTIC
302222,Maeyeong-ro,Yeongtong-gu,Suwon-si,
Gyeonggi-do, Korea
e-mail:support@bfna.krITel:+82-70-8202-0438
302222,Maeyeong-ro,Yeongtong-gu,Suwon-si,
Gyeonggi-do, Korea
e-mail:support@bfna.krITel:+82-70-8202-0438
User Manual
MM2B
➊
➋
➋
➌
➊
➊
➌
WARNING:Toreducetheriskoffireorelectric
shock, do not expose this apparatus to rain or
moisture.
The apparatus shall not be exposed to dripping or
splashing and that objects filled with liquids, such
as vases, shall not be placed on apparatus.
shock, do not expose this apparatus to rain or
moisture.
The apparatus shall not be exposed to dripping or
splashing and that objects filled with liquids, such
as vases, shall not be placed on apparatus.
WARNING: The battery (battery or batteries or bat-
tery pack) shall not be exposed to excessive heat
such as sunshine, fire or the like.
tery pack) shall not be exposed to excessive heat
such as sunshine, fire or the like.
WARNING: The direct plug-in adapter is used as
disconnect device, the disconnect device shall
remain readily operable.
disconnect device, the disconnect device shall
remain readily operable.
Correct Disposal of this product.
This marking indicates that this product
should not be disposed with other house-
holdwastesthroughouttheEU.
To prevent possible harm to the environ-
ment or human health from uncontrolled
waste disposal, recycle it responsibly to
promote the sustainable reuse of mate-
rial resources. To return your used device,
please use the return and collection systems
or contact the retailer where the product
was purchased. They can take this product
for environmental safe recycling.
should not be disposed with other house-
holdwastesthroughouttheEU.
To prevent possible harm to the environ-
ment or human health from uncontrolled
waste disposal, recycle it responsibly to
promote the sustainable reuse of mate-
rial resources. To return your used device,
please use the return and collection systems
or contact the retailer where the product
was purchased. They can take this product
for environmental safe recycling.
WARNING: Please refer the information on exterior
bottom enclosure for electrical and safety informa-
tion before installing or operating the apparatus.
bottom enclosure for electrical and safety informa-
tion before installing or operating the apparatus.
Note
The product label is located at the bottom of the
product.
The product label is located at the bottom of the
product.
The power plug or electrical appliances combiner
is used as a separation device, and such separa-
tion device should be stored in an easily accessible
place.
is used as a separation device, and such separa-
tion device should be stored in an easily accessible
place.
This product should be used indoors.
• This product is not designed or tested to be used
in outdoor places such as recreational vehicles or
vessels.
vessels.
It is required to use only the provided power supply
device.
device.
This product complies with the requirements
ofallapplicableEUguidelines.Youcanfind
the full text of the standard compliance notifi-
cation statement at; www.bfna.kr
ofallapplicableEUguidelines.Youcanfind
the full text of the standard compliance notifi-
cation statement at; www.bfna.kr
Power Supply
Input: AC 100 - 240 V 50/60 Hz0.6 A
Output: DC 12.0 V1500 mA
Model:FD10K-15120-1500
Manufacture:Shenzhenforeversheen
Input: AC 100 - 240 V 50/60 Hz0.6 A
Output: DC 12.0 V1500 mA
Model:FD10K-15120-1500
Manufacture:Shenzhenforeversheen
china electronics.,co.,ltd