JASKEY ELECTRONICS CO. LTD. CR328-811 Benutzerhandbuch

1. Mood Light
2. Safety Light
3. Bluetooth Speaker
4. Bluetooth Indicator Light
5. USB Charging Port
6. USB Charging Indicator
7. TF Card Slot

8. Reset Hole
9. Light ON/OFF Button
10. Power ON / Mode Change
11. Prev. Song / Volume -
12. Hands Free / Play / Pause
13. Next Song / Volume +

9

10 11

12 13

1

2

6

3

4

  5

  7

8

The speaker will ‘beep’ during playback or when
the speaker is turned ON to indicate battery 
power is low. It is recommended to charge 
your speaker.

Insert one end of the USB cable into the 
5V USB power adaptor and the other end to 
the Speaker USB charging port.
The red indicator light next to the USB charging 
port will light up showing the speaker battery is
being charged. It will take approx. 4~5 hours
for a full battery charge.
The USB charging light will turn GREEN once 
the battery is fully charged. 
Make sure to disconnect the USB adaptor from
the mains after charging. 
Note: 
Charging by PC USB port will take longer time.

- Press and hold the Power button (    ) for 3 seconds to turn on the bluetooth speaker.  
  The Bluetooth indicator light (4) will start blinking (blue color).
- From your mobile device, go to ‘Setting’ icon and Select ‘Bluetooth’.  Turn on 
  Bluetooth function and search for ‘SUPIKA’.  
- Select ‘SUPIKA’ for pairing.  The speaker will play a sound when it is successfully
  connected.
- The Bluetooth Indicator light will stop blinking and remain in blue color.
- If the speaker is not paired within 10 minutes, it will go into standby mode. 

Bluetooth

Available Devices

- SUPIKA

- Press and hold the POWER ON button (     ) for 3 seconds to turn on the speaker.
- Turn on Bluetooth function from the mobile device
- Play Music player app from mobile device.
- Press and hold the Vol + / Vol - to adjust to the desired volume level.  The speaker
  will beep when the maximum / minimum sound level is reached.
- Press ‘               ‘ button once to advance to PREV / NEXT song. 
- Press ‘       ‘ to pause / resume song. 

To play music using the TF card:
- Insert TF memory card into TF card slot.
- Press MODE button (             ) and the speaker 
  will beep twice. The Bluetooth indicator light 
  will turn ‘RED’ from ‘BLUE’ color. The RED 
  light will start blinking and music from the 
  TF card will play automatically. 
- The speaker support Mp3 and WAV files only. 
- Press and hold the Vol + / Vol - to adjust to 
  the desired volume level.  
- Press ‘                ‘ button once to advance to 
  PREV / NEXT song.

- Press ‘     ‘ to receive an incoming phone call.
- Press and hold ‘      ‘ button for 3 seconds to refuse an incoming call.
- To call back the last number you dialed, press ‘     ‘ button twice.
- Press ‘Vol + / Vol - ‘ to increase or decrease the volume respectively
- To hang up the phone call, press ‘      ‘ button once.

- Press ‘       ‘ button once to turn on the Mood light to ‘low light’ mode. 
  The Safety Light at the bottom of the unit will also be activated.
- Press again to change the Mood light to bright light.
  The Safety Light remain ‘ON’.
- Press ‘       ‘ button to change to Mood light function.  The light will change to 
  different colors continuously over a period of time. The Safety Light remain ‘ON’.  
- Press ‘      ‘ to stop at the desired mood light color.  The Safety Light remain ‘ON’.
- Press ‘      ‘ to turn off the Mood light.
  The Safety Light will also turn off.

- Press and hold the POWER ON button (     ) for 3 seconds to turn ON/OFF the 
  speaker.