Nauticast GmbH NAUTICASTB2 Benutzerhandbuch
Page 10 of 32
B2 Product Manual 2_0
2.4.2 Configuring Software and Nauticast B2 static data
The functions of Link2AIS are arranged in a series of menus. Depending on the version
of Link2AIS installed not all menu entries shown below may be visible.
Open ‘AIS Settings’ - ‘Identification’. This will display the 'Static Data' for the connected
transponder. This includes the vessel's name, call sign, MMSI number and other fixed
information.
To configure the transponder all of the data fields must be filled and saved.
CAUTION:
For security reasons the MMSI of the vessel cannot be changed by the end user once
they are programmed. Do NOT program the MMSI unless you are certain you have the
correct information. Please check the number entered carefully. If the MMSI is
programmed incorrectly or has to be changed at a later date you have to contact your
supplier or Nauticast GmbH (www.nauticast.com) for a MMSI reset.