HUIZHOU FORYOU GENERAL ELECTRONICS CO. LTD. BVML9384 Benutzerhandbuch

9

1.  Popular OE steering wheel functions are already pre-programmed from the factory. If your 

vehicle does not support the exact same functions already pre-programmed, you will need to 

clear / reset the SWC interface and program in the exact functions of your vehicle. To clear / 

reset the SWC interface, touch [ 

Reset ] icon.

2.  To begin programming the SWC interface after it has been cleared / reset, press a number 

1 ~ 12, then press a function. A check mark should appear corresponding to the number 

and function. Continue programming in this manner until all of the OE steering wheel control 

functions are completed. 

 

 NOTE: 

   Functions 1 ~ 12 must be assigned to a function on the OE steering wheel. For example, if 

the OE steering wheel does not support Preset + and Preset -, then these functions must be 

cleared / reset in order for the other functions to work correctly.

3.  To “learn” the programming completed in step 2 above, touch the [ 

Learn ] icon. You will then 

be prompted to push each button on the OE steering wheel (for 1 second), so the unit can learn 

the corresponding function.

4.   SWC learning / programming is now complete.

5.   Touch  [   ] to exit.

1.  Touch [   ].
2.  Touch an option repeatedly to select.

Subwoofer

On

Turn On the subwoofer.

Off

Turn Off the subwoofer

Subwoofer Filter

80Hz

Select a crossover frequency to set a cut-off frequency for the subwoofer’s LPF 

(low-pass filter).

120Hz
160Hz

Loudness

On

Turn On the loudness

Off

Turn Off the loudness

1.  Touch [   ].

2.  Touch an option repeatedly to select.

Date

Y/M/D

Touch

 [   ] 

or

 [   ] 

to set year, month and day.

Clock Format

24Hr/12Hr Touch [ 24Hr ] or [ 12Hr ] to switch clock mode.

Time

H/M

Touch

 [   ] 

or

 [   ] 

to set hour and minutes.

NOTE:
When date/time is set, touch [ 

Save ] to confirm or [ Cancel ] to exit.