Le Shi Zhi Xin Electronic Technology Limited LEGFS-201 Benutzerhandbuch

Power indication and charging:

To replace action buttons:

Yellow

LB

LT

RB

RT

Y

B

X

A

Orange

Green

Blue

Red

Black

Brown

Purple

When the battery level of the device is low, the LED Power Indicator 

Light will blink slowly. Plug the USB cable into a device with a USB 

port to charge. During charging, the power indicator light will blink. 

When the battery is fully charged, the light will remain on.

1. Open the storage compartment on the back of the device and 

use the hex tool to remove the 7 screws from the bottom of the 

device.

2. Remove the connecting cable from the underside of the 

button to be replaced by pressing the tabs on both sides of 

the button.

3. Insert the new button and turn it until it's tightly installed.
4. Connect the corresponding cable based on the sticker color 

guide inside the internal compartment.

5. Install the bottom plate and screws back on the device.