Baicells Technologies Co. Ltd. MBS1100 Benutzerhandbuch
Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx
22
Figure 4-21 Installation of Mounting Bracket and Handle Completed
Install GPS Antenna
4.4
Installation requirements on the GPS antenna:
No major blocking from buildings in the vicinity. Keep the rooftop buildings a
distance away from the GPS. Make sure the space atop within 90 degrees (at least
45 degrees) is not blocked by any buildings.
Avoid installing the GPS in the vicinity of any other transmitting and receiving
devices. Avoid interference from other transmitting antennas to the GPS antennas.
Should be installed within 45 degrees to the lightning rod.
The GPS antenna lightning arrestor is required before connecting to the base
station.
The following describes the steps of the GPS antenna installation.
1. Prepare the following assembly units for the GPS antenna installation.
Included GPS antenna, feed cable, GPS mounting bracket 1 and GPS mounting
bracket 2.
2. Fit the GPS mounting bracket 2 on base station with M4 screws.