APPI Technology SAS BSAPC2U01 Benutzerhandbuch
1
APPI-Com V3.0 – Copy prohibited
www.appi-technology.com
APPI-Com
LR
Full-Duplex Hands-Free
VoiceCom system
CE MODELS: BS-APC2-0x and BS-APC2-Ax
FCC/IC MODELS: BS-APC2U-0x/Bx
Singapore MODELS: BS-APC2S-0x/Bx
USER’s MANUAL
Version 3.0
Introduction : Thank you for choosing APPI-Com !
The APPI-Com
LR
kit (“Long Range” Series, from Rev. 2.0) allows communication in a "hands free &
conference mode” over several free-band channels for the mobile team members. No "Base", Relay or
"Master unit": thanks to the Syncall® Technology (exclusive patent),
"Master unit": thanks to the Syncall® Technology (exclusive patent),
the signal loss of any of the kit43’s
module does not affect the communication between the others
, and the “lost” one can return at any
time into the dialogue: a guarantee of safety and efficiency for the team!
The modules of a kit should be set to the same channel to communicate: the kit establishes a full-duplex
dialogue on any of the 16 available channels (US Version), allowing the simultaneous use of several kits in
the same area.
Several usages are possible: the “natural” TALK mode allows full-duplex conversation while the LISTEN
mode enables listen to the team members but not participate to the conversation. Each module can be
used interchangeably in "Talk" or in "Listen". The MULTIplex configuration allows create teams of more
than 3 members: in this case, the “priority” pair can have a full-duplex hands-free conversation while any
other team member can intervene, only one at a time, to ensure that only one conversation takes place on
the used channel.
dialogue on any of the 16 available channels (US Version), allowing the simultaneous use of several kits in
the same area.
Several usages are possible: the “natural” TALK mode allows full-duplex conversation while the LISTEN
mode enables listen to the team members but not participate to the conversation. Each module can be
used interchangeably in "Talk" or in "Listen". The MULTIplex configuration allows create teams of more
than 3 members: in this case, the “priority” pair can have a full-duplex hands-free conversation while any
other team member can intervene, only one at a time, to ensure that only one conversation takes place on
the used channel.
APPI-Com modules are IP66 certified (dust and water) and use frequencies set in the ISM free bands (CE or
FCC/IC certified). The use of APPI-Com in several countries could be restricted: users must comply with
standards in the country of use.
FCC/IC certified). The use of APPI-Com in several countries could be restricted: users must comply with
standards in the country of use.
ATEX Version (Atmosphere EXplosive): model BS-APC2-Ax
The
ATEX
version of the device is different from the standard one: one can clearly identify it with it
special front side marked with the ATEX symbol
ATEX certification class:
CE
II 3G/D Eex is T6 IP67
ATEX certification: usage limitations & compliance with ATEX regulation
1. Usage temperature limits : -10°C à +60°C
2. Authorized for use
2. Authorized for use
in a zone 2
(GAS) and
zone 22
(DUST)
3. Authorized for use with the provided ATEX Audio accessory, exclusively.
4. Authorized for use with the provided rubber cover, exclusively.
5. Authorized for use with the provided internal or pre-fitted external antenna, exclusively.
6. Prohibited to connect or disconnect device peripherals in a zone 2 or 22.
7. Prohibited to remove the pre-fitted external antenna in a zone 2 or 22.
8. Prohibited to remove the rubber cover in a zone 2 or 22.
9. Prohibited to use the device in a zone 1 or 21 and a zone 0 or 20, or if the plastic case is
4. Authorized for use with the provided rubber cover, exclusively.
5. Authorized for use with the provided internal or pre-fitted external antenna, exclusively.
6. Prohibited to connect or disconnect device peripherals in a zone 2 or 22.
7. Prohibited to remove the pre-fitted external antenna in a zone 2 or 22.
8. Prohibited to remove the rubber cover in a zone 2 or 22.
9. Prohibited to use the device in a zone 1 or 21 and a zone 0 or 20, or if the plastic case is
defective.
10. Prohibited to charge the battery in a zone 0, 1 or 2 and zone 20, 21 or 22.