Zhongshan Loease Electronic Technology Co. ltd 0001 Benutzerhandbuch
Please insert batteries or remove the insulating strip from the
battery contacts before using. Replace the batteries when the
"Low Battery Indicator" shows.
battery contacts before using. Replace the batteries when the
"Low Battery Indicator" shows.
INSTRUCTION MANUAL
Equipped with High Precision "Strain-Gauge" Sensors
Capacity 180kg (396lb/28.3st)
Division 100g/0.2lb
Capacity 180kg (396lb/28.3st)
Division 100g/0.2lb
Blue backlight LCD Display
Bluetooth 4.0
1.Place the scale on a hard,flat surface will ensure on the
greatest accuracy and repeatability.
greatest accuracy and repeatability.
2.Turn on APP and set your parameter.
If no weighing is carried out or weight is stable on the scale
the scale will automatically switch off after approximately 10
seconds.
the scale will automatically switch off after approximately 10
seconds.
When the scales are overloaded(over180kg/396lb/28.3st),the
following will appear on the screen:
following will appear on the screen:
When the batteries need replacing,the following will appear
on the screen:
on the screen:
Please open the back board of the scales,then take batteries
carefully out of the battery compartment.
carefully out of the battery compartment.
Place your scales on a hard, flat surface will ensure the great-
est accuracy and repeatability.
Always weigh yourself on the same scales placed on the same
floor surface. Uneven floors may affect the readings.
Keep packaging material away from children!
Protect the scale against knocks,damp,dust,chemicals,
drastic changes in temperature, electromagnetic field
and source of heat that are too near.
Never step onto the outer edge of the scale with one foot
as this could cause the scales to tip!
If the scale would not be used in a long period,please take
the battery out,and make sure there is nothing on the scale.
Store the scale horizontally,don’t vertically.
If the reading appears inaccurate or LCD without displaying.
please check if the battery and the contact point are well
connected.
please check if the battery and the contact point are well
connected.
Scale,body fat,body water,muscle percentage,bone mass
and calories analysis 6 in 1
and calories analysis 6 in 1
Auto on/zero/off
Overload and Low Battery Indication
Overload and Low Battery Indication
3.Stepping onto the scale,show the weight then the number on
LCD flash 3 times,wait for about 3 seconds,the data transfer
to your smart phone.
LCD flash 3 times,wait for about 3 seconds,the data transfer
to your smart phone.
4.Bluetooth body fat scale:manage the weight ,body water,
muscle percentage,bone mass and calories data.
muscle percentage,bone mass and calories data.
APP download
Android and IOS APP:
Please scan the right QR code and
download Fitbrick App
Warm Tip
Please make sure the reality:Age,Sex,Height.so that get the exact
data.
THANK YOUR FOR CHOOSING OUR HIGH PRECISION
BLUETOOTH SCALE.IN ORDER TO CORRECTLY USE THE
SCALE,PLEASE READ THE INSTRUCTION CAREFULLY.
BLUETOOTH SCALE.IN ORDER TO CORRECTLY USE THE
SCALE,PLEASE READ THE INSTRUCTION CAREFULLY.
Cleaning:You can clean the scale with a damp cloth and
a little washing up liquid, if required. Never immerse the
scale in water or rinse it under running water.
Note:without turning on the APP,only show the weight
Bluetooth body fat scale