Shanghai Sunmi Technology Co. Ltd. W6900 Benutzerhandbuch
Power button
Volume buttons
Menu button
Home button
Return button
Instructions for charging and battery
This device supports charging by USB cable or dock.
· Connect the 5V adapter to the power supply socket.
· Connect the USB cable to USB interface of the device.
· The screen will display charging icon during charging.
· Please check the USB connect if there is no charging icon.
· Connect the 5V adapter to the power supply socket.
· Connect the USB cable to USB interface of the device.
· The screen will display charging icon during charging.
· Please check the USB connect if there is no charging icon.
Instructions/Notes for battery
· This device adopts 3.6V/5200mAh Lithium battery, please don’t
remove the battery.
· In order to protect the battery life, please charge your device
whenever possible and don’t let battery to fully drain before
charging.
remove the battery.
· In order to protect the battery life, please charge your device
whenever possible and don’t let battery to fully drain before
charging.
Open handle
NFC reader
①
③
②
SIM card slot
Battery
Battery cover
Indicator light
Printer
Speaker
IC card reader
Magnetic card reader
Ultra-simple setting
Trouble shooting
Printer not working
· Make sure the cover of paper container is closed correctly.
· Make sure the right printing pater is used and fed.
· Check whether 58mm × 40mm thermal paper roll is fed into the
paper container.
· If the printed paper is blank, please check whether the paper roll
has been installed in the correct direction.
· Make sure the right printing pater is used and fed.
· Check whether 58mm × 40mm thermal paper roll is fed into the
paper container.
· If the printed paper is blank, please check whether the paper roll
has been installed in the correct direction.
The device can’t be power on(eg, exhausted battery).
· Connect the device properly with a USB cable to charge for
three minutes.
· Check whether the charging icon is displayed or not.
three minutes.
· Check whether the charging icon is displayed or not.
What we can do if the system freezes
Press the power button for 11 seconds to reboot.
Printing paper
SIM
SAM card slot
Strap ring
USB interface
Indicator light
Remind the payment steps for band card.
USB interface
Use for charging or developer debugging.
Camera
5M Auto Focus, 1D&2D scanner.
Flash light
For lighting in camera mode.
SAM card slot
For inserting encrypted SAM cards.
SIM card slot
Note: To prevent system errors, please make sure the device is off when
you insert or remove the SIM card.
you insert or remove the SIM card.
· Move the battery cover horizontally to open.
· Insert/remove SIM card in the direction as shown.
· Fasten the battery cover horizontally.
(Support GSM/CDMA/WCDMA/TDS CDMA/EVDO/LTE SIM card.)
Battery
Avoid contacting with water, metal material and other electrically
equipment while in use.
Strap ring
For fixing handheld strap to prevent slippage.
Extend pins
To connect to dock.(Need to buy dock separately)
Printing instructions
This device support 58mm thermal paper with the specification of
57±0.5mm×Ø40mm
· Please open pater container with open handle, as shown in
Fig.1. Please don’t open directly to damage print gear.
· Put the paper correctly into the pater container as shown and
pull some paper outside the cutter, as shown in Fig.2.
· Close the cover of pater container to finish print paper feeding,
as shown in Fig.3.
57±0.5mm×Ø40mm
· Please open pater container with open handle, as shown in
Fig.1. Please don’t open directly to damage print gear.
· Put the paper correctly into the pater container as shown and
pull some paper outside the cutter, as shown in Fig.2.
· Close the cover of pater container to finish print paper feeding,
as shown in Fig.3.
Note: If the printed paper is blank, please check whether the paper roll has
been installed wrong.
been installed wrong.
Only a few steps to start the smart business device
①
2G/3G/4G settings, in the power-off status, insert related 2G(GSM/CD-
MA)/3G(WCDMA/TDS CDMA/EVDO)/4G(LTE) SIM card and then power it on.
(For card support details, please read the technical specification table)
(For card support details, please read the technical specification table)
②
Long-press the power button for 2 to 3 seconds, and then the screen is
lightened. Enter the first power-on interface and just operate according to
instructions. The device provides two Internet accessing modes for selection.
instructions. The device provides two Internet accessing modes for selection.
③
WIFI setting
·Click the [setting] button, then enable WLAN, enter the WLAN search
interface, and wait for its search for accessible WLAN hotspots and the
result;
result;
·Click on the WLAN you want to connect to. If you select an encrypted
network, you need to enter the access code to connect.
How to download/un-install applications
In the networked mode, open the application market, browse and download
applications to complete the installation of related applications.
applications to complete the installation of related applications.
Camera
Flash light
Extend pins
Software uninstall method: select "Settings-> Applications-> Manage
Applications-> Uninstall" to uninstall the application; or long press the
icon to drag it to the trash to uninstall.
Applications-> Uninstall" to uninstall the application; or long press the
icon to drag it to the trash to uninstall.
USB interface
supply socket
Adapter
Power button
Short Press:
Wake up the screen, lock the screen.
Long Press:
Long press for 2-3 seconds in power off mode switches on the
device.
Long press for 2-3 seconds in normal operation mode selects
power off or reboot.
Long press for 11 seconds when system is frozen automati cally
reboots.
Volume buttons
Volume adjusts. These buttons can be set as quick scan button by
app setting.
Printer
For printing sales slips in power on mode.
Return button
Tap to return to the previous screen.
Home button
Tap to quickly go back home screen.
Menu button
Tap to quickly view the background apps.
Select the app and slide laterally to close.
Magnetic card reader
Read the magnetic stripe information of bank cards.
IC card reader
Read the chip-based band cards.
NFC reader
Read the contactless card information.
Please read “Help App” in the device
for more information on user’s guidance
Name and Content of Toxic or Harmful
Substances in this Product
Means that the content of the toxic or harmful substance
in all homogeneous materials of this part is below the limit
stipulated in SJ/T11363-2006.
Means that the content of the toxic or harmful substance in
at least one of the homogeneous materials of this part is
beyond the limit stipulated in SJ/T11363-2006; but as for
the component marked with “×” on the table, the content is
beyond the l imit since there is no alternative mature
technology in the industry yet.
Part Name
Components of circuit board
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
chromium
(Cr(VII)
Polybrominated
biphenyls
(PBB)
Polybrominated
diphenyl ethers
(PBDE)
Toxic or Harmful
Substances
or Elements
The products reaching or exceeding the environmental service
life shall be recycled per “Regulations on the Control and
Management of Electronic Information Products” and shall not
be littered.