DECATHLON USA LLC KITCOM Benutzerhandbuch
1 / Placement of batteries:
To remove the Battery cover, use a suitable coin and turn to the left ¼ turn (clockwise).
Place the 3 AA batteries (1.5Volts) according to the indications "+" and "-"
To close the product, press firmly on the battery cover and turn to the right ¼ turn (counterclockwise).
Be careful that the 4 tooth of battery cover are well inserted into the snorkel.
2 / Product installation:
Insert the snorkel on the top of the EB 500 mask until the feel the clic of the clip.
To remove the tuba, press the clip firmly before extracting.
3 / Switching on / off:
To switch on: Press and hold (2 seconds) the center button until you hear a beep and see the light turn green.
To switch off: press the center button continuously (2 seconds) until you hear a beep and see the light blink red 3
times.
4 / Communication function:
Put the mask on the head and if necessary readjust the Kitcom sound (see 5 /).
5 / Sound level:
Press the + or - button to readjust the sound. A specific sound signal is emitted when the product is at its
minimum / maximum volume.
6 / Distance of use:
The product can be used between 0 and 30 meters. Beyond this distance, the communication quality may be
altered or cut off.
7 / Council of use:
For optimal listening, choose the immersed position of the snorkel: the speaker must be placed completely under
water.
8 / and 9 / Maintenance tip:
After each use, rinse the product with clean water and dry it with a textile product.
For storage longer than 1 week, remove the batteries from the product.
To remove the Battery cover, use a suitable coin and turn to the left ¼ turn (clockwise).
Place the 3 AA batteries (1.5Volts) according to the indications "+" and "-"
To close the product, press firmly on the battery cover and turn to the right ¼ turn (counterclockwise).
Be careful that the 4 tooth of battery cover are well inserted into the snorkel.
2 / Product installation:
Insert the snorkel on the top of the EB 500 mask until the feel the clic of the clip.
To remove the tuba, press the clip firmly before extracting.
3 / Switching on / off:
To switch on: Press and hold (2 seconds) the center button until you hear a beep and see the light turn green.
To switch off: press the center button continuously (2 seconds) until you hear a beep and see the light blink red 3
times.
4 / Communication function:
Put the mask on the head and if necessary readjust the Kitcom sound (see 5 /).
5 / Sound level:
Press the + or - button to readjust the sound. A specific sound signal is emitted when the product is at its
minimum / maximum volume.
6 / Distance of use:
The product can be used between 0 and 30 meters. Beyond this distance, the communication quality may be
altered or cut off.
7 / Council of use:
For optimal listening, choose the immersed position of the snorkel: the speaker must be placed completely under
water.
8 / and 9 / Maintenance tip:
After each use, rinse the product with clean water and dry it with a textile product.
For storage longer than 1 week, remove the batteries from the product.
USER MANUAL