XMT Lab. Inc. GS1 Benutzerhandbuch
3
Stick the Gecko Switch anywhere you want
Gecko Glue
Gecko Glue
2
Linking to the Base Switch (optional)
If you buy the Gecko switch with a Base Switch in the same package, they are already linked by default
at the factory, so there is no need to manually link these switches. If you bought the Base Switch and
Gecko Switch separately or somehow the link was broken, they can be linked manually by holding
BOTH the main switch button and the “+” button for 3 seconds to enter pairing mode for both switches.
A long beep will sound when successfully linked.
at the factory, so there is no need to manually link these switches. If you bought the Base Switch and
Gecko Switch separately or somehow the link was broken, they can be linked manually by holding
BOTH the main switch button and the “+” button for 3 seconds to enter pairing mode for both switches.
A long beep will sound when successfully linked.
3 seconds Simultaneously
Gecko
Base
4
Remove peel of the Gecko Glue at the back of the Gecko Switch. Then put it anywhere you like.
To change location of the Gecko Switch, remove it very, very slowly. Then put it somewhere else.
The glue pad can be removed and reused over and over again. Try it!
To change location of the Gecko Switch, remove it very, very slowly. Then put it somewhere else.
The glue pad can be removed and reused over and over again. Try it!
HINT
The Gecko Glue can
be washed with water to
regain its stickiness.
The Gecko Glue can
be washed with water to
regain its stickiness.