TATUNG COMPANY OF AMERICA INC. A28188E Benutzerhandbuch
7
Pin Description
Matters needing attention before patch installed the WIFI
module
module
1.the customer must be at the time of open stencil will solder
hole up WIFI module, please press 1 to 1
hole up WIFI module, please press 1 to 1
0.7 mm is widened to open outward again, according to the
thickness of 0.12 mm.
thickness of 0.12 mm.
2.the WIFI module before launch patch must bake for 12 hours,
the temperature at 120 degrees +/- 5 degrees.
the temperature at 120 degrees +/- 5 degrees.
3.baking advice online immediately after OK, don't after a
baking OK will all WIFI module
baking OK will all WIFI module
Block out of baking box. How many Suggestions posted how
much per hour.
much per hour.
4.there is need to get the WIFI module must not be light to get
WIFI module, be sure to wear
WIFI module, be sure to wear
On the gloves and static ring.
MODEL: A28188E