Romancell Technology Co. Ltd. SCP5560 Benutzerhandbuch
3
C
Indoor ANT Installation
※
Leave the main unit away from the
window and remain more than 20ft (6m) direct
separation distance from the outdoor antenna to avoid the cell booster’s loop
oscillation.
oscillation.
D
Power Adaptor
※
The cell booster power must be turned on
after all the Outdoor/Indoor ANT has
been installed. Ensure that all the connectors are connected
tightly for testing/using.
Plug the AC-DC Adaptor
in AC power.
Socket/Strip
Power on the cell booster
►This action must be done
after all connection setup
has been completed!
has been completed!
Reset the power
E
Minimum Separation Distance Limitation
The minimum separation distance limitation (the distance between the outdoor ANT
and the booster) should be
and the booster) should be
more than 20ft (6m) to avoid the cell booster that may
cause loop oscillation.
※
The booster will shut down the circuit and cause the LED to blink. The users
must
tune/adjust the outdoor ANT direction / location and / or lengthen the separation
distance between the outdoor ANT and booster for loop oscillation prevention.
distance between the outdoor ANT and booster for loop oscillation prevention.
(See
P.5 for proper operation and P.9 for troubleshooting. For best reception, more
tuning/adjusting information see
P.5-P.6)
※
Remove the DC plug from the DC jack of the cell booster, await 5 sec, re-plug to
Reset the power while re-adjust/tune the outdor antenna direction/location, or
debug the abnormal status
debug the abnormal status
each time.
1.
2.