Roseman Engineering Ltd. 2288 Benutzerhandbuch
998 Old Eagle School Road, Suite 1215
|
Wayne, Pennsylvania 19087
|
T: 610-225-8350
|
F: 610.971.9447
|
www.assetworks.com
74
18.1.2
Mounting the SVID
The location of the SVID will be determined according to the device type.
SVID with external antenna is mounted in the vehicle trunk or behind the fuel tank.
Important
The SVID should be mounted on the vehicle before performing the
activation.
activation.
18.1.3
FIA to SVID
Connect each of the intrinsically safe FIA wires to the "T-Ring" points (Polarity is not important)
at the SVID. Pass the SVID and its intrinsically safe cable to the selected mounting site. You
must find a clear path to run the cable from the fuel tank to the selected SVID mounting site.
You may use existing holes in the vehicle body. Make sure not to drill outer parts of the vehicle
and not to cause any damage to the operation of vehicle. Use grommets to protect cable that
you pass through holes. Remove plastic or rubber parts blocking the way. Make sure to re-
install all removed parts after the wires have been passed through.
Do not use an electric drill or any other electrical power tools within
3 feet of the filler neck or fuel tank as this area is considered a
Class I, Group D hazardous location.
3 feet of the filler neck or fuel tank as this area is considered a
Class I, Group D hazardous location.