Fantem Technologies Co. Ltd FT101 Benutzerhandbuch
The Cube integrates the IR transmitter, which means that you can use the
Oomi Touch to learn the button function of your original IR controller, so
that you can control your IR household devices directly by the Oomi Touch.
For how to implement the IR button learn operation, open the IR controller
page on the Oomi Touch and follow the UI guidelines to start the button
learn process.
If you are in need of any technical support during or subsequent to your
products’ warranty, please get in touch with our support team via
http://aeotec.com/support. The Company you bought this product from
has also guaranteed to assist you with any of your support needs, and you
can also contact them for accordingly.
This guarantee made by the company who you purchased the product from
includes the transfer of Aeon Labs’ full warranty to that Company. They’ve
guaranteed that they’ll be able to assist you, the Customer, with all technical
support and repair needs on our behalf.
Aeon Labs warrants to the original purchaser of Products, that is the
Company who you have purchased from, that for the Warranty Period (as
defined below), the Products will be free from material defects in materials
and workmanship. The foregoing warranty is subject to the proper
installation, operation and maintenance of the Products in accordance with
installation instructions and the operating manual supplied. Warranty
claims must be made to the Company who you have purchased from in
writing within thirty (30) days of the manifestation of a problem.
Aeon Labs' sole obligation under the foregoing warranty is, at Aeon Labs'
option, to repair, replace or correct any such defect that was present at the
time of delivery, or to remove the Products and to refund the purchase price
to Company.
The Warranty Period begins on the date the Products is delivered and
continues for 12 months. Any repairs under this warranty must be
conducted by an authorized Aeon Labs service representative and under
Aeon Labs' RMA policy. Any repairs conducted by unauthorized persons
shall void this warranty.
Excluded from the warranty are problems due to accidents, acts of God, civil
or military authority, civil disturbance, war, strikes, fires, other catastrophes,
misuse, misapplication, storage damage, negligence, electrical power
problems, or modification to the Products or its components.
Aeon Labs does not authorize any person or party to assume or create for
it any other obligation or liability in connection with the Products except as
set forth herein. Aeon Labs will pass on to Company all manufacturers’
Material warranties to the extent that they are transferable, but will not
independently warrant any Material. Company will assist Customer with all
warranty, repair, return and technical support needs, Company must prepay
shipping and transportation charges for returned Products, and insure the
shipment or accept the risk of loss or damage during such shipment and
transportation. Aeon Labs will ship the repaired or replacement products to
Company freight prepaid.Customer and Company shall indemnify, defend,
and hold Aeon Labs and Aeon Labs' affiliates, shareholders, directors,
officers, employees, contractors, agents and other representatives harmless
from all demands, claims, actions, causes of action, proceedings, suits,
assessments, losses, damages, liabilities, settlements, judgments, fines,
penalties, interest, costs and expenses (including fees and disbursements of
counsel) of every kind (i) based upon personal injury or death or injury to
property to the extent any of the foregoing is proximately caused either by
Model number: FT101.
Power supply: DC 5V, 2A powered by adapter (Adapter input:
100-240V~,50-60Hz, 0.25A).
Operating temperature: 0℃ to 40℃.
Relative humidity: 8% to 80%.
Storage temperature:-20℃ to 50℃.
Wireless technology: Wi-Fi 2.4GHz 802.11b/g/n. Bluetooth 4.0 with BLE.
NFC. Z-Wave.
CPU: Quad-Core ARMv7 Processor (VFPv4, NEON), 2.0GHz×4.
Operating distance: Up to 300 feet/100 meters outdoors for Z-Wave RF
range.
1.
2.
This device may not cause harmful interference, and
This device must accept any interference received, including
interference that may cause undesired operation. This equipment has
been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Do not dispose of electrical appliances as unsorted municipal waste, use
separate collection facilities.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY
NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST
ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
The device has been evaluated to meet general RF exposure requirement.
To maintain compliance with FCC's RF exposure guidelines, this equipment
should be installed and operated with a minimum distance of 20cm
between the radiator and your body.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures: —Reorient or
relocate the receiving antenna. —Increase the separation between the
equipment and receiver. —Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected. —Consult the
dealer or an experienced radio/TV technician for help.
Contact your local government for information regarding the collection
systems available.
Z-Wave and Z-Wave Plus are registered trademarks of
Sigma Designs and its subsidiaries in the United States
and other countries.
FCC ID: 2AKHBFT101
IC: 22199-FT101
Advanced functions.
5
Technical specifications.
6
Warranty.
7
IR Blaster.
Should you wish to restore your Cube to its factory default settings. Simply
press the Reset Button in the manage UI. Your Cube would be reset to its
factory default settings.
Reset your Cube.
FCC NOTICE (for USA)
Warning
FCC Part 15.19 Warning Statement
IC Warning:
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage,
et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
The device has been evaluated to meet general RF exposure requirement.
To maintain compliance with RSS-102 — Radio Frequency (RF) Exposure
guidelines, this equipment should be installed and operated with a
minimum distance of 20cm between the radiator and your body.
le dispositif de a été évalués à répondre général rf exposition exigence.
pour maintenir la conformité avec les directives d'exposition du RSS¬102 -
Radio Fréquence (RF), ce matériel doit être installé et exploité à une
distance minimale de 20 cm entre le radiateur et votre corps.
RF warning statement:
FCC Part 15.105 Warning Statement
RF warning statement:
NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR
MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE
FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
FCC Part 15.21 Warning Statement
Certifications (regional):
a defective product (including strict liability in tort) or by the negligent or
willful acts or omissions of Customer or its officers, employees,
subcontractors or agents, and/or (ii) arising from or relating to any actual or
alleged infringement or misappropriation of any patent, trademark, mask
work, copyright, trade secret or any actual or alleged violation of any other
intellectual property rights arising from or in connection with the products,
except to the extent that such infringement exists as a result of Aeon Labs'
manufacturing processes.
IN NO EVENT SHALL AEON LABS BE LIABLE FOR ANY INDIRECT,
INCIDENTAL, PUNITIVE, SPECIAL OR CONSEQUENTIAL DAMAGES, OR
DAMAGES FOR LOSS OF PROFITS, REVENUE, OR USE INCURRED
BYCUSTOMER, COMPANY OR ANY THIRD PARTY, WHETHER IN AN ACTION
IN CONTRACT, OR TORT, OR OTHERWISE EVENIF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. AEON LABS' LIABILITY AND
CUSTOMER'S EXCLUSIVE REMEDY FOR ANY CAUSE OF ACTION ARISING
IN CONNECTION WITH THIS AGREEMENT OR THE SALE OR USE OF THE
PRODUCTS, WHETHER BASED ON NEGLIGENCE, STRICT LIABILITY, BREACH
OF WARRANTY, BREACH OF AGREEMENT, OR EQUITABLE PRINCIPLES, IS
EXPRESSLY LIMITED TO, AT AEON LABS' OPTION, REPLACEMENT OF, OR
REPAYMENT OF THE PURCHASE PRICE FOR THAT PORTION OF PRODUCTS
WITHRESPECT TO WHICH DAMAGES ARE CLAIMED. ALL CLAIMS OF ANY
KIND ARISING IN CONNECTION WITH THIS AGREEMENT OR THE SALE OR
USE OF PRODUCTS SHALL BE DEEMED WAIVED UNLESS MADE IN
WRITING WITHIN THIRTY (30) DAYS FROM AEON LABS' DELIVERY, OR THE
DATE FIXED FOR DELIVERY IN THE EVENT OF NONDELIVERY. THE
INDEMNITY AND WARRANTY IN ABOVE ARE EXCLUSIVE AND IN LIEU OF
ALL OTHER INDEMNITIES OR WARRANTIES, WHETHER EXPRESS OR
IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
STORE INDOORS WHEN NOT IN USE. SUITABLE FOR DRY LOCATIONS.
DO NOT IMMERSE IN WATER. NOT FOR USE WHERE DIRECTLY EXPOSED
TO WATER.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
The antenna(s) used for this transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
This device complies with FCC/RSS Standard RF radiation exposure
limits set forth for an uncontrolled environment
L'antenne (s) utilisée (s) pour cet émetteur ne doit pas être co-située
ou fonctionner en conjonction avec une autre antenne ou émetteur.
Cet appareil est conforme aux limites d'exposition aux rayonnements
RF standard FCC / RSS établies pour un environnement non contrôlé
operating in conjunction with any other antenna or transmitter.
This device complies with FCC/RSS Standard RF radiation exposure
limits set forth for an uncontrolled environment
L'antenne (s) utilisée (s) pour cet émetteur ne doit pas être co-située
ou fonctionner en conjonction avec une autre antenne ou émetteur.
Cet appareil est conforme aux limites d'exposition aux rayonnements
RF standard FCC / RSS établies pour un environnement non contrôlé