Cisco 1000BASE-LX/LH long haul GBIC (SM/MM) WS-G5486= Datenbogen

Produktcode
WS-G5486=
Seite von 5
Cisco Systems, Inc.
All contents are Copyright © 1992–2003 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 2 of 5
Cisco 1000BASE-LX/LH GBIC
The Cisco 1000BASE-LX/LH GBIC (WS-G5486) fully complies with the IEEE 802.3z 1000BASE-LX standard.
However, its higher optical quality allows it to reach 6.2 miles (10 kilometers) over single-mode fiber (SMF),
compared with the 3.1 miles (5 km) specified in the standard.
Cisco 1000BASE-ZX GBIC
The Cisco 1000BASE-ZX GBIC (WS-G5487) operates on ordinary single-mode fiber optic link spans up to 43.4
miles (70 km) long. Link spans of up to 62 miles (100 km) are possible using premium single-mode fiber or dispersion
shifted single-mode fiber. The GBIC provides an optical link budget of 23 dB—the precise link span length will
depend on multiple factors such as fiber quality, number of splices, and connectors.
When shorter distances of single-mode fiber are used, it might be necessary to insert an in-line optical attenuator in
the link to avoid overloading the receiver:
• A 5-dB or 10-dB inline optical attenuator should be inserted between the fiber-optic cable plant and the receiving
port on the Cisco 1000BASE-ZX GBIC at each end of the link whenever the fiber-optic cable span is less than
15.5 miles (25 km).
Technical Specifications
This section covers the Cisco 1000BASE-SX GBIC, Cisco 1000BASE-LX/LH GBIC, and the Cisco 1000BASE-ZX
GBIC, unless otherwise specified. Technical specifications for the Cisco 1000BASE-T GBIC can be found in a separate
document, Cisco 1000BASE-T Gigabit Interface Converter Data Sheet.
Platform Support
Cisco GBICs are supported across a variety Cisco switches, routers, and optical transport devices. For more details,
see the document GBIC Compatibility Matrix.
Connectors and Cabling
Connectors: Dual SC connector
Table 1 provides cabling specifications for the Cisco GBICs that you install in the Gigabit Ethernet port. Note that
all Cisco GBICs have SC-type connectors, and the minimum cable distance for all GBICs listed (multimode fiber
[MMF] and single-mode fiber [SMF]) is 6.5 feet (2 m).