Transition Networks SRS2F3129-102 Merkblatt
Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
tel: 952.941.7600 / 800.526.9267
fax: 952.941.2322
info@transition.com
http://www.transition.com
fax: 952.941.2322
info@transition.com
http://www.transition.com
©2011 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
Specifications
Standards
EIA/TIA-574, EIA/TIA RS-232E
Data Rate
115 Kbps
Switches
DTE/DCE: Select appropriate position
Loopback: Norm = normal operation;
Loop = Fiber and copper loop-back
Loopback: Norm = normal operation;
Loop = Fiber and copper loop-back
Status LEDs
P: (Power): Lit for normal operation
RX: Steady = Copper Link;
Flashing = Rx Data
FL: Steady = Fiber Link;
Flashing = Loop back mode
RX: Steady = Copper Link;
Flashing = Rx Data
FL: Steady = Fiber Link;
Flashing = Loop back mode
Dimensions
Width: 3.3" [84 mm]
Depth: 4.8" [122 mm]
Height: 1.2" [30 mm]
Depth: 4.8" [122 mm]
Height: 1.2" [30 mm]
Power Consumption
5.0 Watts
Power
External AC/DC; 12 VDC, 0.5A min
Environment
0 – 50°C,
5% – 95% humidity (non-condensing),
0 – 10,000 ft.
5% – 95% humidity (non-condensing),
0 – 10,000 ft.
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL Listed and CSA certified
UL Listed and CSA certified
Regulatory Compliance
CISPR22/EN55022 Class A + EN55024;
EN60950 Class A; FCC Class A; CE Mark
EN60950 Class A; FCC Class A; CE Mark
Warranty
Lifetime
Ordering Information
SRS2F3111-100
DB-9
[15 m/49 ft.]
to 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SRS2F3113-100
DB-9
[15 m/49 ft.]
to 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SRS2F3114-100
DB-9
[15 m/49 ft.]
to 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
SRS2F3115-100
DB-9
[15 m/49 ft.]
to 1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
SRS2F3129-100
DB-9
[15 m/49 ft.]
to 1310TX/1550RX single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
SRS2F3129-101
DB-9
[15 m/49 ft.]
to 1550TX/1310RX single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
SRS2F3129-102
DB-9
[15 m/49 ft.]
to 1310TX/1550RX single fiber SM (SC)
[40 km/24.8 mi.] Link Budget: 25.0 dB
SRS2F3129-103
DB-9
[15 m/49 ft.]
to 1550TX/1310RX single fiber SM (SC)
[40 km/24.8 mi.] Link Budget: 25.0 dB
Optional Accessories
(sold separately)
Wide Input (24 - 60 VDC) Power Supplies
SPS-2460-PS
Piggy Back Power Supply
SPS-2460-SA
Stand-Alone Power Supply
Mounting Options
E-MCR-05
12-Slot Media Converter Rack
RMS19-SA4-01
4-Slot Media Converter Shelf
WMBD
DIN Rail Bracket 5.0" [127 mm]
WMBD-F
DIN Rail Bracket (flat) 3.3" [84 mm]
WMBL
Wall Mount Bracket 4.0" [102 mm]
WMBV
Vertical Wall Mount Bracket 5.0" [127 mm]
Link a remote terminal to a host computer: Connect multiple devices, such as security scanners, POS devices, remote ter-
minals and building access/alarming systems to a host computer. Ideal for campus or business environments where re-
mote devices can be networked in a point-to-point configuration where distances are greater than the 15 meter limitation
of conventional copper serial cables.
minals and building access/alarming systems to a host computer. Ideal for campus or business environments where re-
mote devices can be networked in a point-to-point configuration where distances are greater than the 15 meter limitation
of conventional copper serial cables.
Transition Networks’ serial RS232 to Fiber converter allows you to extend the distance between serial connections with
the use of fiber optic cable. This full-featured converter transmits the full complement of RS232 flow control/handshak-
ing signals optically and supports full or half-duplex asynchronous data transmission at speeds up to 115 Kbps.
the use of fiber optic cable. This full-featured converter transmits the full complement of RS232 flow control/handshak-
ing signals optically and supports full or half-duplex asynchronous data transmission at speeds up to 115 Kbps.
The diagnostic features included on this converter make installation easy and intuitive. A DTE/DCE switch eliminates the
frustration over selecting the appropriate cable. A loop-back switch allows for complete diagnostic testing prior to sys-
tem turn-up or during troubleshooting. Unit and Port LEDs allow for quick status information of the converter.
frustration over selecting the appropriate cable. A loop-back switch allows for complete diagnostic testing prior to sys-
tem turn-up or during troubleshooting. Unit and Port LEDs allow for quick status information of the converter.
In addition to status LEDs and switch settings for local management, these converters can also be managed from remote
locations when used in conjunction with a managed Point System™ chassis.
locations when used in conjunction with a managed Point System™ chassis.
Extend Network Distance
SRS2F311x-100
stand-alone media converter
Features
Remote Management
Local or Remote Loopback on
copper and fiber
DTE/DCE switch for easy
installation with
straight-through cabling
straight-through cabling
Additional Features
Full/Half-duplex asynchronous
transmission at speeds up to
115 Kbps
115 Kbps
Supports the following flow
control signaling:
1. DCD - Data Carrier Detect
2. RXD - Receive Data
3. TXD - Transmit Data
4. DTR - Data Terminal Ready
5. SG - Signal Ground
6. DSR - Data Set Ready
7. RTS - Request To Send
8. CTS - Clear To Send
2. RXD - Receive Data
3. TXD - Transmit Data
4. DTR - Data Terminal Ready
5. SG - Signal Ground
6. DSR - Data Set Ready
7. RTS - Request To Send
8. CTS - Clear To Send
RS232 Copper to Fiber with
Remote Management
RS232
Remotely Managed RS232 Media Converter