Asrock X79 Extreme3 X79 EXTREME3 Benutzerhandbuch

18

2.4  Installation of CPU Fan and Heatsink

This motherboard is equipped with 2011-Pin socket that supports Intel 2011-Pin 

CPU. Please adopt the type of heatsink and cooling fan compliant with Intel 2011-

Pin CPU to dissipate heat. Before you installed the heatsink, you need to spray 

thermal interface material between the CPU and the heatsink to improve heat dis-

sipation. Ensure that the CPU and the heatsink are securely fastened and in good 

contact with each other. Then connect the CPU fan to the CPU_FAN connector 

(CPU_FAN1, see page 12, No. 6).  

Below is an example to illustrate the installation of the heatsink for 2011-Pin CPU.

Step 1.  Apply thermal interface material onto center of 

IHS on the socket surface.

Step 2.  Place the heatsink onto the socket. Ensure 

fan cables are oriented on side closest to the 

CPU fan connector on the motherboard (CPU_

FAN1, see page 12, No. 6).

Step 3.  Align screws with the motherboard’s holes.

Step 4.  Use a screw driver to install the screws.

If you don’t fasten the screws, the heatsink cannot be secured on 

the motherboard.

Step 5.  Connect fan header with the CPU fan connector on the motherboard.

Step 6.  Secure excess cable with tie-wrap to ensure the cable does not interfere  

 

with fan operation or contact other components.