Intermec IF30 IF30B12300000002 Merkblatt

The IF30 is a cost-effective, high 

performance fixed reader that reliably 

reads and writes UHF RFID tags in “RF 

noisy” environments. The IF30’s receive 

sensitivity enables large populations of 

tags to be interrogated at high speeds, 

which is critical to many use cases involving 

dock doors, portals and conveyors. In 

addition to reading tags at distances over 

15 feet (4.6 meters), the IF30 can filter 

tag data to prevent sending redundant 

information to the host system. 

With best in class Dense Reader Mode 

performance, the IF30 fixed reader allows 

users to grow their RFID operations 

to include multiple dock doors in close 

proximity, thus enabling accurate, 

automated receiving and shipment 

verification. This drives more effective put 

away processes. 

Increased receive sensitivity allows the 

IF30 to interrogate weaker/unreadable 

tags that often lead to expensive exception 

handling processes and slower supply chain 

throughput. 

Unlike all competitors, the IF30 has a built-

in power supply and 4 mono-static RF ports 

which reduce the costs and complexity at 

installation with fewer component pieces 

to complete the overall solution. 

Continuing to focus on keeping the costs of 

ancillary equipment and installation low, 

the IF30 fixed reader includes powered 

general purpose input/output (GPIO) 

circuitry, which allows direct monitoring 

and/or controlling of peripherals such 

as presence detectors and signal lights 

without requiring extra devices and power 

supplies to facilitate the connection. 

Intermec SmartSystem® Foundation, a 

device management system included on 

the IF30, lets you view and configure all of 

the settings contained in the device from 

one convenient location allowing for a 

quicker set-up. 

SmartSystems-enabled devices appear 

on an administrator’s console, providing 

real-time visibility to device status and 

information, and centralized access to 

remote devices like the IF30 reader. 

The intuitive console allows administrators 

to change device settings, send firmware 

upgrades, update software applications, 

and execute other changes directly from 

the console to save time and significantly 

cut costs. 

The IF30 reader is also supported by 

Intermec’s RFIDeploy Services which 

•  Dense reader mode enables superior

adjacent dock door reading

•  Conveyor reading up to 1600 fpm

•  Directly monitors and controls

presence detectors and signal lights

•  Multi-protocol reading and

writing of UHF RFID tags

•  Factory configurable to

operate in 865MHz, 869MHz

or 915MHz RFID bands

•  On-board device management

•  Built in power supply

Product profile

Fixed Reader

IF

30