Finisar FTLX8571D3BNL Benutzerhandbuch
© Finisar Corporation -May 2009
Rev. B
Page 1
Product Specification
RoHS-6 Compliant
Extended
Temperature
10Gb/s
850nm
SFP
+
Datacom
Transceiver
FTLX8571D3BNL
PRODUCT FEATURES
• Hot-pluggable SFP+ footprint
• Supports 9.95 to 10.5 Gb/s bit rates
• Power dissipation < 1W
• RoHS-6 compliant (lead-free)
• Extended temperature range
• Supports 9.95 to 10.5 Gb/s bit rates
• Power dissipation < 1W
• RoHS-6 compliant (lead-free)
• Extended temperature range
0°C to 85°C
• Single 3.3Vpower supply
• Maximum link length of 300m on
• Maximum link length of 300m on
2000 MHZ-km MMF
• Uncooled 850nm VCSEL laser
• Receiver limiting electrical
• Receiver limiting electrical
interface
• Duplex LC connector
• Built-in digital diagnostic functions
• Built-in digital diagnostic functions
APPLICATIONS
• 10GBASE-SR/SW 10G Ethernet
• 1200-Mx-SN-I 10G Fibre Channel
• 1200-Mx-SN-I 10G Fibre Channel
Finisar’s FTLX8571D3BNL Extended Temperature 10Gb/s SFP+ transceivers are
designed for use in 10-Gigabit Ethernet and 10-Gigabit Fibre Channel links over
multimode fiber. They are compliant with SFF-8431
designed for use in 10-Gigabit Ethernet and 10-Gigabit Fibre Channel links over
multimode fiber. They are compliant with SFF-8431
1
, SFF-8432
2
, IEEE 802.3ae
10GBASE-SR/SW
3
and 10G Fibre Channel 1200-Mx-SN-I
4
. Digital diagnostics
functions are available via a 2-wire serial interface, as specified in SFF-8472
5
. The
FTLX8571D3BCL is a “limiting module”, i.e., it employs a limiting receiver. Host board
designers using an EDC PHY IC should follow the IC manufacturer’s recommended
settings for interoperability with an SFP+ limiting module. The transceiver is RoHS
compliant and lead free per Directive 2002/95/EC
designers using an EDC PHY IC should follow the IC manufacturer’s recommended
settings for interoperability with an SFP+ limiting module. The transceiver is RoHS
compliant and lead free per Directive 2002/95/EC
6
, and Finisar Application Note AN-
2038
7
.
PRODUCT SELECTION
FTLX8571D3BNL