Kramer Electronics TP-581T Merkblatt
TP-581T
HDMI, Bidirectional RS
−
232, Ethernet & IR over Twisted Pair Transmitter
The TP
−
581T is a high
−
quality twisted pair
transmitter for HDMI, Ethernet 100BaseT,
bidirectional RS
bidirectional RS
−
232 and IR signals. The
TP
−
581T takes the HDMI input, and converts
it with the Ethernet 100BaseT, RS
−
232 and
IR input signals to a twisted pair signal. The
TP
TP
−
582R converts the twisted pair signal
back to Ethernet 100BaseT, RS
−
232, IR and
two HDMI outputs, and de
−
embeds the
audio to S/PDIF and TOSLINK® audio
outputs.
outputs.
Max. Data Rate
- 2.25Gbps.
HDBaseT Technology.
HDTV Compatible.
HDCP Compliance.
HDMI Support
- HDMI (V.1.4 with Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby
TrueHD, DTS
−
HD, CEC).
3D Pass-Through.
EDID PassThru
- Passes EDID signals between the source and display.
Bidirectional RS-232 Interface
- Commands and data can flow in both directions via the RS
−
232 interface, allowing
status requests and control of the destination unit.
Ethernet Interface
- Passes 100BaseT.
System Range
- Up to 100m (330ft).
Cable
- Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's
BC
−
DGKat524, BC
−
DGKat623 and BC
−
DGKat7a23 cables. Note that the transmission range depends on the signal
resolution, graphics card and display used. The distance using non
−
Kramer CAT 5, CAT 6, and CAT 7 cables may
not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
Control
- Front panel.
Indicators
- Status LEDs for input selection, output, link and power.
Compact MegaTOOLS®
- 2 units can be rack mounted side
−
by
−
side in a 1U rack space with the optional RK
−
T2B
universal rack adapter.
FEATURES