Kramer Electronics TP-582R Merkblatt

 

1:2 HDMI Plus Bidirectional RS

−

232, Ethernet & IR over Twisted Pair Receiver

 

 

The TP

−

582R is a high

−

quality twisted pair 

receiver for HDMI, Ethernet 100BaseT, 
bidirectional RS

−

232 and IR signals. The 

TP

−

582T selects one of two HDMI inputs, 

and converts it with the Ethernet 100BaseT, 
RS

−

232 and IR input signals to a twisted 

pair signal. The TP

−

582R converts the 

twisted pair signal back to Ethernet 
100BaseT, RS

−

232, IR and two HDMI 

outputs, and de

−

embeds the audio to 

S/PDIF and TOSLINK® audio outputs. 

Max. Data Rate

 - 2.25Gbps.

 

 

HDBaseT Technology.  

HDTV Compatible.  

HDCP Compliance.  

HDMI Support

 - HDMI (V.1.4 with Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby 

TrueHD, DTS

−

HD, CEC).

  

3D Pass-Through.  

EDID PassThru

 - Passes EDID signals between the source and display.

  

Bidirectional RS-232 Interface

 - Commands and data can flow in both directions via the RS

−

232 interface, allowing 

status requests and control of the destination unit.

  

Ethernet Interface

 - Passes 100BaseT.

  

System Range

 - Up to 100m (330ft).

  

Cable

 - Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's 

BC

−

DGKat524, BC

−

DGKat623 and BC

−

DGKat7a23 cables. Note that the transmission range depends on the signal 

resolution, graphics card and display used. The distance using non

−

Kramer CAT 5, CAT 6, and CAT 7 cables may 

not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.

  

Control

 - Front panel.

  

Indicators

 - Status LEDs for input selection, output, link and power.

  

Compact MegaTOOLS®

 - 2 units can be rack mounted side

−

by

−

side in a 1U rack space with the optional RK

−

T2B 

universal rack adapter.

  

FEATURES