ECS A780GM-A Ultra V1.0 A780GM-A ULTRA V1.0 Benutzerhandbuch
Produktcode
A780GM-A ULTRA V1.0
32
Using BIOS
Boot Up Numlock Status (On)
This item defines if the keyboard Num Lock key is active when your system is
started.
started.
Quick Power on Self Test (Enabled)
Enable this item to shorten the power on testing (POST) and have your system start
up faster. You might like to enable this item after you are confident that your system
hardware is operating smoothly.
up faster. You might like to enable this item after you are confident that your system
hardware is operating smoothly.
AMD C&Q (Enabled)
APIC Mode (Enabled)
This item allows you to enable or disable the APIC (Advanced Programmable Inter-
rupt Controller) mode. APIC provides symmetric multi-processing (SMP) for sys-
tems, allowing support for up to 60 processors.
rupt Controller) mode. APIC provides symmetric multi-processing (SMP) for sys-
tems, allowing support for up to 60 processors.
1st/2nd/3rd Boot Device (Hard Drive/CD/DVD/1st FlOPPY DRIVE)
Use this item to determine the device order the computer used to look for an
operating system to load at start-up time. The devices showed here will be different
depending on the exact devices installed on your motherboard.
operating system to load at start-up time. The devices showed here will be different
depending on the exact devices installed on your motherboard.
This item helps the system to lower the frequency when CPU idles. When the
frequency decreases, the temperature will drop automatically as well.
frequency decreases, the temperature will drop automatically as well.
Advanced Setup
This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Advanced Setup
The HyperTransport
link will run at this
speed if it is slower
than or equal to the
system clock and the
board is capable.
link will run at this
speed if it is slower
than or equal to the
system clock and the
board is capable.
Help Item
F10: Save ESC: Exit
+/-/: Value
Enter : Select
F9: Optimized Defaults
F1:General Help
: Move
CPU Virtualization (Enabled)
Hardware Virtualization Technology enables processor feature for running multiple
simultaneous Virtual Machines allowing specialized software applications to run in
full isolation of each other.
simultaneous Virtual Machines allowing specialized software applications to run in
full isolation of each other.
HT Frequency
Auto
HT Frequency (Auto)
This item enables users to adjust the HT frequency. The default setting is auto and we
recommend users leave the setting unchanged. Modify it at will may cause the system
to be unstable.
recommend users leave the setting unchanged. Modify it at will may cause the system
to be unstable.
Enhanced Halt (C1E) (Enabled)
This item enables or disables enhanced halt.
This item enables or disables enhanced halt.
CPU Virtualization
Enabled
AMD C&Q
Enabled
Enhanced Halt (C1E)
Enabled
Quick Power on Self Test
Enabled
Boot Up Numlock Status
On
APIC Mode
Enabled
1st Boot Device
Hard Drive
2nd Boot Device
CD/DVD
3rd Boot Device
1st FLOPPY DRIVE
Removable Drives
Press Enter
Boot Other Device
Yes