SATO LM408e WLM408011 Merkblatt

Direct Thermal, Thermal Transfer

203 dpi (8 dot/mm)

305 dpi (12 dot/mm)

Up to 6 ips

4.1" (104 mm) W x 49" (1,245 mm) L

4.1" (104 mm) W x 32" (813 mm) L

Reflective Sensor (for use with pre-printed I-marks)

Adjustable See-Through Sensor (for die-cut label with gap)

Roll and Fanfold

Width

0.866" (22 mm) - 5.04" (128 mm) 

Length

0.237" (6 mm) - 49" (1,245 mm) L

0.237" (6 mm) - 32" (813 mm) L

Thickness

0.003" (0.08 mm) - 0.010" (0.26 mm)

Outer Diameter

8.6" ( 218.44 mm)

Inner Diameter

3" (76.2 mm)

Wind Orientation

Face-in

Size

Max. 4.37" (111 mm) W x 1476' (450 m) L

Wind Orientation

Face-in

XU, XS, XM, XB ,XL, OCR-A, OCR-B

Linear

UPC-A/E, EAN8/13, JAN8/13, CODE 39, CODE 93, CODE 128, UCC/EAN 128,  

Interleaved 2 of 5, Industrial 2 of 5, Matrix 2 of 5, NW-7, MSI, BookLand, POSTNET

2-Dimensional

QR Code, PDF417, Maxi Code, Data Matrix

Parallel IEEE1284, High-Speed RS232C Serial, Ethernet, 802.11g Wireless, USB

100-120 / 200-240 Volt AC (Jumper)

Operating

41° to 104°F (5° to 40°C), 30-80% RH, non-condensing

Storage

23° to 140°F (-5° to 60°C), 30~90% RH, non-condensing

10.67" (271 mm) W × 16.92" (430 mm) D × 12.64" (321 mm) H 

28.66 lbs. (13 kg)

Status Report, Graphic, Sequential Numbering, Form Overlay, Custom Designed 

Character, Font Decoration, Reverse Image, Line Print, Hex Dump Print, Format Store, 

Outline, Outline Variation, Label Skip, Zero Slash Switch-Over

Head Check, Paper End, Ribbon End, Ribbon Near End

, Head Open, Test Print

General 

Specifications

 

Print speeds available depend on the print resolution and media used. 

Ribbon near-end can be detected with 30 - 15 m of ribbon remaining.

LM408

e

/412

e

SATO America, Inc.

10350-A Nations Ford Road, Charlotte, NC 28273
Phone: (704) 644-1650 Fax: (704) 644-1662
E-mail: satosales@satoamerica.com

© 2008 SATO America, Inc. All rights reserved. Rev. 01/08

*Specifications subject to change without notice