Edge-Core ES3528MV2-DC M0NEC3528001Z-C Datenbogen

The Edge-Core ES3528MV2/ES3528MV2-DC are Fast Ethernet Layer 2/4 switches featuring 28 ports; 24 100BASE-TX 

ports and 4 combination Gigabit Ethernet RJ-45/SFP (Small Form Factor Pluggable) ports. They are ideal for desktop 

Fast Ethernet connectivity and wiring closet installations with their quiet fanless design for silent operations. Using IP 

Clustering for a virtual stack of up to 36 switches, the whole stack can be managed as a single entity with a single IP 

address. These switch are packed with features and are a cost-effective solution that bring continuous availability, 

enhanced security and advanced QoS to the network edge, while maintaining simplicity of management with optional DC 

power capability. 

With 12.8 Gbps switching capacity, the ES3528MV2/ 

ES3528MV2-DC deliver wire-speed switching performance 

on all Gigabit ports, allowing users to take full advantage of 

existing high-performance, Gigabit integrated servers, PCs 

and laptops by significantly improving the responsiveness of 

applications and file transfer times.

There are four Gigabit Ethernet combination ports for uplink 

flexibility, allowing copper or fiber uplinks. The switch also 

supports digital diagnostic monitoring (DDM) for SFP 

transceivers.

IEEE 802.1w Rapid Spanning Tree Protocol provides a 

loop-free network and redundant links to the core network 

with rapid convergence, to ensure faster recovery from 

failed links, enhancing overall network stability and 

reliability.

IEEE 802.1s Multiple Spanning Tree Protocol runs STP per 

VLAN base, providing Layer 2 load sharing on redundant 

links.

IEEE 802.3ad Link Aggregation Control Protocol (LACP) 

increases bandwidth by automatically aggregating several 

physical links together as a logical trunk and providing load 

balancing and fault tolerance for uplink connections.

The ES3528MV2/ES3528MV2-DC support G.8032 Ethernet 

Ring Protection Switching with the ability for the network to 

detect and recover from incidents without impacting users, 

meeting the most demanding quality and availability 

requirements. Rapid recovery time when problems do occur 

is as low as 50ms. 

Eight egress queues per port enable differentiated 

management of up to eight traffic types. Traffic is prioritized 

according to 802.1p and DSCP, giving optimal performance 

to real-time applications such as voice and video. 

Asymmetric bidirectional rate-limiting, per port or per traffic 

class, preserves network bandwidth and allows maximum 

control of network resources.

Port security allows access to switch ports based on MAC 

address, limits the total number of devices from using a 

switch port, and protects against MAC flooding attacks.

IEEE 802.1X port-based or MAC-based access control 

ensures all users are authorized before being granted 

access to the network. User authentication is carried out 

using any standard-based RADIUS server. 

Access Control Lists (ACLs) can be used to restrict access 

to sensitive network resources by denying packets based 

on source and destination MAC addresses, IP addresses, 

or TCP/UDP ports. ACLs are hardware supported, so 

switching performance is not compromised.

Secure Shell (SSH) and Secure Sockets Layer 

(SSL/HTTPS) encrypts Telnet and web access to the 

switch, providing secure network management. 

TACACS+/RADIUS authentication enables centralized 

control of the switch and prevents unauthorized users from 

altering the configuration of the switch.

Private VLANs isolate edge ports to ensure user privacy. 

IGMP snooping prevents flooding of IP multicast traffic and 

limits bandwidth intensive video traffic to only the 

subscribers.

The ES3528MV2/ES3528MV2-DC support IEEE 802.1ag 

Connectivity Fault Management (CFM) and ITU-T Y.1731, 

allowing service providers to monitor end to end services, 

identify connectivity/performance issues, and isolate 

problems from a remote location without dispatching onsite 

service personnel. 

Additionally, this provides the capability to monitor service 

availability, delay, jitter, and dropped packets, used to verify 

SLA conformance for billing purposes while providing 

advance indication of performance degradation before a 

service outage occurs.

An industry-standard Command Line Interface (CLI), 

accessed through the console port or Telnet, provides a 

convenient way to configure and troubleshoot the switch. 

An embedded user-friendly web interface helps users 

quickly and simply configure the switch. Four-group RMON 

is supported to collect traffic statistics and run network 

diagnostics. The switch can also backup and restore 

firmware and configuration files via TFTP.