Fujitsu S26361-F1373-L248 Benutzerhandbuch

System configurator and order-information guide

PRIMERGY RX300 S7 Status 2014-03-31

Configuration diagram PRIMERGY RX300 S7

System unit ( I )

with up to 4, 8, 12 or 16x 2.5" Hard disk drives

Motherboard

front side

Memory CPU1

( Channel A + B + C )

Bay for LocalView LCD

Bank 1 (4 Modules)

Xeon DP

LSD

Bank 2 (4 Modules)

2 USB

Bank 3 (4 Modules)

Air channel

VGA, LAN

Memory CPU2

Frontpanel

( Channel D + E + F)

Bay for 5,25"x 0,5" SATA-BR

Bank 1 (4 Modules)

Xeon DP

or DVD-ROM/RW

Bank 2 (4 Modules)
Bank 3 (4 Modules)

Accessible drives ( V )

Memory (III )

Processor ( II )

rear side

Needs space for 4

Fan 1 - Fan 5

2.5" hard disk drives!

1. PSU

2. PSU

3.5"x1,6"

Redundant Fans
are standard!

Backup drive option 1

Redundant power
supply option

Needs space for 8
2.5" hard disk drives!
5.25"x1,6"

Modular RAID

Raid Card for IME, Raid 0 / 1E

Support

Raid Card for Raid 5

Backup drive option 2

Low-profile extension slots for:
SCSI Controller for backup( VII )

Hard disk drives ( VI )

SAS Disk Array ( VIII )

2.5" SAS/SATA

Communication/Network ( IX )
Miscellaneous ( X )

Up to 4 blocks with 4 HDDs

Slot 6 PCIe-3 x16, 390mm @ CPU2

Slot 5 PCIe-3 x16, 390mm @ CPU2

Slot 4 PCIe-3 x8, max. 390mm @ CPU1

Possibility to install PCIe x16 cards

Slot 3 PCIe-3 x8, max. 390mm @ CPU1

Slot 2 PCIe-3 x8, max. 312mm @ CPU1

Slot 1 PCIe-3 x8, max. 168mm @ CPU1 white colored

Dedicated for modular on-board LAN-Controller

Slot 7 PCIe-3 x8, max. 168mm @ CPU1

Internal slot for modular RAID-Controller

Key:

Included in basic unit

Option

One CPU, one memory per CPU and one PSU has to be selected for an orderable basic unit.

2.5" SAS or SATA

Fujitsu PRIMERGY Server

4 of 31