Omnitron iConverter 8207-9 Merkblatt

 

■ The high-density iConverter 19-Module Chassis is 2U 

high and supports 19-inch or 23-inch rack mounts

 

■ Triple-redundant hot-swappable AC, 24VDC and 

48VDC power for mission-critical networks

 

■ NEBS Level 3 Certification 

 

■ Ethernet Backplane allows modules to share data to 

support a wide variety of network applications

 

■ Fiber Cable Management Tray available for high-

density CWDM deployments

 

■ Up to 19 iConverter chassis can be linked and managed 

using a single IP address

 

■ SNMP management via NetOutlook® provides real-

time port and module information, remote parameter 

configuration and trap notification

 

■ Management is available with the addition of a 

management module to the chassis

 

■ Wide (-40 to +60° C) and extended (-40 to +75° C) 

temperature range models are available

 

■ All iConverter modules are hot-swappable when used 

with the 19-Module Chassis

 

■ Lifetime Warranty and free 24/7 Technical Support

The 2U (3.5 inch) high iConverter 19-Module Chassis has 

triple-redundant power supplies and can be mounted in a 

19-inch or 23-inch rack.  It is designed for Enterprise Local 

Area Network (LAN) and Metropolitan Area Network (MAN) 

applications where fault tolerance and a high-density rack 

footprint are essential.

The 19-Module Chassis features three hot-swappable, 

redundant power supplies.  Universal AC, 24VDC and 48VDC 

power supplies can be used in any combination.  Omnitron’s 

exclusive triple-redundant power supplies operate in load-

sharing mode to reduce the burden on each power supply to 

extend the lifetime and fault tolerance.  

Power is provided to the nineteen iConverter modules 

installed in the chassis via the chassis backplane.  When used 

with an iConverter management module, the management 

capabilities include the ability to monitor the voltage, current 

and temperature of each power supply.  Any out-of-range 

violation can trigger an SNMP trap to allow quick corrective 

maintenance.  

In addition to handling the power and management data for 

each iConverter module, the 19-Module Chassis backplane 

allows sharing of Ethernet data between the individual modules.  

iConverter modules that are installed in adjacent slots and 

equipped with Ethernet backplane ports have the ability to 

connect to each other via the chassis’ Ethernet backplane and 

facilitate  a  variety  of  flexible  network  applications  including 

unmanaged, out-of-band managed, in-band managed and 

multi-port configurations.

The high reliability of the triple-redundant power system 

combined with its AC and DC power options and its ability to 

hold nineteen converters in a 2U height make the iConverter 

19-Module Chassis the ideal choice in the core of an enterprise, 

in  a  Central  Office  (CO)  or  for  Point  of  Presence  (POP) 

applications where reliability and space are critical.

The iConverter 19-Module Chassis supports the entire family 

of iConverter fiber media converters.  All iConverter modules 

are hot swappable and support multiple mounting options.