Omnitron iConverter NMM2 8000N-0 Merkblatt
Produktcode
8000N-0
iConverter
iConverter
®
Provides real-time management, trap notification and
■
remote configuration
Supports SNMPv1, SNMPv2c, SNMPv3 and Telnet
■
protocols
SNMP management via Omnitron’s
■
NetOutlook
®
management software, or third-party SNMP
management software
Password protected to prevent unauthorized access
■
Utilizes IEEE 802.3ah OAM extensions and Omnitron’s
■
Secure OAM for IP-Less management
Managed via the front-plane RJ-45 Ethernet port, the
■
front-plane serial port or the Ethernet interface of an
adjacent module connected across the backplane
10/100Mbps RJ-45 port supports auto or manual
■
negotiation
LED displays for immediate visual status of each port
■
Hot-swappable in 19-Module, 5-Module, or 2-Module
■
chassis
Lifetime Warranty and free 24/7 Technical Support
■
iConverter
NMM2
Network Management Module
The iConverter NMM2 provides comprehensive remote
monitoring, configuration and alarm notification functions for all
iConverter managed media converters and Network Interface
Devices (NIDs). Installed in any slot of an iConverter chassis,
the NMM2 manages all other modules and power supplies
installed in the chassis through a high-speed management
backplane. Additionally, all remote NIDs linked to the managed
iConverter chassis may be managed by the installed NMM2
through a secure IP-less management channel.
Through the 10/100 RJ-45 Ethernet port, the NMM2 can
be remotely accessed by IP-based management protocols,
including SNMPv1/2c/3, TELNET and FTP. The serial
console port provides local access and initial configuration
from an RS-232 terminal. Management is accessed either
via NetOutlook®, Omnitron’s SNMP Management Software, or
by any third party SNMP management software. An intuitive
Command Line Interface (CLI) can be accessed either via the
serial port or TELNET.
The NMM2 provides real-time management, continuously
collecting system status and module information. It reports the
collected status to the network management applications and
displays LED alarms for chassis power supplies. The NMM2
also provides comprehensive provisioning support for all local
and remote iConverter modules, including port settings, VLANs
and rate limiting. Network alarms are forwarded as traps to
multiple trap hosts and recorded in a persistent system log.
In the event of a power outage, the NMM2 also supports dying
gasp SNMP trap notification.
The NMM2 manages remote NIDs connected to the managed
chassis via an IP-less management channel. Utilizing IEEE
802.3ah extensions, an NMM2 in a chassis at the network core
can use a single IP address to manage up to 18 iConverter
Network Interface Devices (NIDs) at different edge locations.
This capability simplifies IP address management, improves
network security and conserves the use of IP addresses.
Key Features