Intel SR1630BC SR1630BCNA Benutzerhandbuch

Appendix A: Integration and Usage Tips 

Intel® Server System SR1630BC TPS 

Revision 1.5 

Intel order number E44588-005 

 

This section provides a list of useful information unique to the Intel

®

 Server System SR1630BC 

that you should keep in mind while integrating the server system. 

• 

The Intel

®

 Server System SR1630BC requires the use of a shielded LAN cable to 

comply with Immunity regulatory requirements.  

• 

Intel

®

 Remote Management Module 3 is not supported the Intel

®

 Server System 

SR1630BC because of mechanical issue.  

• 

Management feature is not support on the power supply of Intel

®

 Server System 

SR1630BC.  

• 

The Intel

®

 Server system SR1630BC supports one riser card that supports one low-

profile half-length PCI Express* x8 add-in card which consumes power less than 15 W. 

• 

Processor fans are not needed and are not supported. The system fan module provides 
the necessary cooling needed for the system.  

• 

You must use the system air duct to maintain system thermals. 

• 

System fans are not hot-swappable. 

• 

A screw on the front edge of the top cover is required when the unit is installed in a user-
accessible environment.  

• 

The FRUSDR utility must be run to load the proper sensor data records for the server 
chassis onto the server board. 

• 

Make sure the latest system software is loaded. This includes the system BMC firmware, 
FRUSDR, and BIOS. You can download the latest system software from: 

http://support.intel.com/support/motherboards/server/S5500BC/