Omnitron iConverter 8221-2 Merkblatt

 

■ The iConverter 5-Module Chassis is 1U (1.75 inch) high 

and supports 19-inch or 23-inch rack mounts

 

■ Redundant, hot-swappable AC, 24VDC and 48VDC  

power supplies for mission critical networks

 

■ NEBS Level 3 Compliant

 

■ Standard temperature range of 0 to +50º C and Wide 

temperature range of -40 to +60º C

 

■ Ethernet backplane allows modules to share data and 

support a wide variety of network applications

 

■ Fiber Cable Management Tray available for high-

density CWDM deployments

 

■ SNMP management via NetOutlook

 provides  

real-time port and module information, remote 

parameter configuration and trap notification

 

■ Management is available with the addition of a 

management module to the chassis

 

■ All iConverter modules are hot-swappable when used 

with the 5-Module Chassis

 

■ Lifetime Warranty and free 24/7 Technical Support

The 1U (1.75 inch) high iConverter 5-Module Chassis 

has redundant power supplies and can be mounted in a  

19-inch or 23-inch rack. It is designed for Enterprise Local 

Area Network (LAN) and Metropolitan Area Network 

(MAN) applications where fault tolerance and reliability are 

essential.
The 5-Module Chassis features two hot-swappable redundant 

power supplies. Universal AC, 24VDC and 48VDC power 

supplies can be used in any combination.  Omnitron’s 

redundant power supplies operate in load-sharing mode to 

reduce the burden on each power supply to extend the lifetime 

and fault tolerance.  
Power is provided to up to five iConverter modules via 

the chassis backplane.  When used with an iConverter 

management module, the management capabilities include 

the ability to monitor the voltage, current and temperature of 

each power supply.  Any out of range violation can trigger an 

SNMP trap to allow quick corrective maintenance.  
In addition to handling the power and management data for 

each  iConverter module, the 5-Module Chassis backplane 

allows sharing of Ethernet data between the individual modules.  

iConverter modules that are installed in adjacent slots and 

equipped with Ethernet backplane ports have the ability to 

connect to each other via the chassis’ Ethernet backplane and 

facilitate  a  variety  of  flexible  network  applications  including 

unmanaged, out-of-band managed, in-band managed and  

multi-port configurations.
The high reliability of the redundant power system combined 

with its AC and DC power options and its ability to hold five 

converters in a 1U height make the 5-Module Chassis the ideal 

choice in a Central Office (CO), Customer Premises (CPE), 

multi-tenant (MTU) or for Point of Presence (POP) applications 

where reliability and space are critical.
The iConverter 5-Module Chassis supports the entire family 

of iConverter fiber media converters.  All iConverter modules 

are hot-swappable and support multiple mounting options.   

In addition to the 5-Module Chassis, they can be mounted in a  

19-Module (2U, 3.5 inch high) space-saving rack-mountable 

chassis (19-inch or 23-inch) with any combination of triple 

redundant  AC, 24VDC and 48VDC power supplies, in a 

2-Module AC or 18-60VDC power chassis or in a 1-Module 

AC power chassis.