Samsung LC24B550US Benutzerhandbuch
44
Using MHL
When the mobile device is not connected or does not
support MHL
NOTE
• Mobile Control and MHL are not supported at the same time.
• If the mobile device is not connected or the connected mobile device does not support the MHL function,
• If the mobile device is not connected or the connected mobile device does not support the MHL function,
the following screen will appear.
• If MHL mode does not activate, check the connection of the mobile device. If MHL mode does not
activate, check if the mobile device supports MHL.
• If MHL mode does not activate even though the mobile device supports MHL, update the firmware on
the device to the latest version.
MHL device is not connected or
the device doesn't support MHL.
the device doesn't support MHL.
MHL
MHL
3 sec later
Check Signal Cable
MHL
NOTE
The indicated time "after 3 seconds" may vary depending on the mobile device.
Disabling MHL
When the cable is disconnected or the mobile device is
powered off
If the mobile cable is disconnected or the mobile device is powered off when MHL is active,
the MHL function will be disabled.
the MHL function will be disabled.
MHL
Disconnect device
or
Power off
MHL device disconnected.
3 sec later
Check Signal Cable
MHL
NOTE
• If the mobile cable is disconnected, the product will display the message
Check Signal Cable
and remain
in
MHL
mode.
• The indicated time "after 3 seconds" may vary depending on the mobile device.