Siemens 2015 Benutzerhandbuch
Important basic settings
17
Gigaset 2015 plus, GBR: A30852-X-1105-B301-1-7619
kap07.fm5
29.10.99
Operation in conjunction with a PBX
To operate your Gigaset 2015 plus in conjunction with a
PBX, you must first enter the following:
PBX, you must first enter the following:
1. the signalling method,
2. the trunk or the main trunk code and
3. the length of the pause following the trunk or main
2. the trunk or the main trunk code and
3. the length of the pause following the trunk or main
trunk code.
Options for setting the signalling method
The signalling method factory setting is
●
DTMF/Flash
For operation in conjunction with PBXs, you must first
switch to one of the following:
●
DP
or
●
DTMF/Flash
When doing this, please read the operating instructions
for your PBX.
B
# 1
Start the procedure.
o
Enter the 4-digit system code (default: “0000”)
(➔ page 19).
O
0 3 3
B
Set dial pulsing (DP).
or
O
0 3 7
B
Set tone dialling DTMF/Flash.