Siemens 2015 Benutzerhandbuch

Gigaset 2015 plus, GBR: A30852-X-1105-B301-1-7619

kap12.fm5

29.10.99

In order to operate the answering machine remotely, you 
must first activate the remote function.

I

 9

Press the keys on the handset in order to call the
answering machine. This results in output of a “ready 
tone”, the mode of operation, the current number of
messages in storage, and (if applicable) the day and
the time.

Y

You call your own number from a remote station. If the 

DID function is activated, you hear a high multiple tone. 

The answering machine switches on after 5 seconds.

# 

o

After the message, press the pound key and enter the 

system code via the telephone’s dialling keypad. For 

checking purposes, the telephone outputs a stand-by 

tone, the operating mode, the current number of mes-

sages saved as well as the relevant weekday and time.

If you enter the incorrect system code, the an-

nouncement "Faulty PIN" is output at the tele-

phone. You can then re-enter the system code.

The connection is automatically cleared down 

after the third incorrect attempt.

Remote operation and DID from another tele-
phone are only possible if a system code which 
is different from the default system code has 
been programmed (➔ page 19).

Remote operation is still possible even if the an-
swering machine has been switched off. In this 
case you simply continue ringing until the an-
swering machine responds.