Sony PCF-FX202 Benutzerhandbuch
Sony Not
e
book Us
er
G
u
id
e
Getting help
79
❑
Check that your printer is correctly configured and that you have up-to-date drivers. If needed, contact
your dealer.
your dealer.
❑
The default setting for the printer port mode is correct for most printers. If you cannot print, try
changing the printer port mode.
changing the printer port mode.
❑
To change the printer port mode, proceed as follows:
❑
Restart your computer.
❑
When you see the Sony-logo, press <F2>.
You are in the BIOS.
You are in the BIOS.
❑
Go to the Advanced tab.
❑
Use the minus-sign on the numeric keyboard to change the printer port mode.
If the printer port mode is set to ECP, change it to Bidirectional (for HP printers). If the printer port is set
to Bidirectional, change it to ECP.
If the printer port mode is set to ECP, change it to Bidirectional (for HP printers). If the printer port is set
to Bidirectional, change it to ECP.
❑
Press <F10> and save the new configuration.
Your PC will restart.
Your PC will restart.
About digital video captures and DVgate
While I am recording images to a digital video device using DVgate, my system displays the message
’Recording to DV device failed. Check the power and cable connections to the DV device and try the
operation again...’
’Recording to DV device failed. Check the power and cable connections to the DV device and try the
operation again...’
Close all open applications and restart your computer. Frequent recording of images to a digital video device
while using DVgate sometimes causes this error.
while using DVgate sometimes causes this error.