Altronix HUBWAY8CD Merkblatt

Altronix HubWay8CD Passive UTP Transceiver
Hub w/Integral Camera Power transmits UTP
video, RS422/RS485 data and power over a
single CAT-5 or higher structured cable. Unit
provides 8 camera channels in a space sav-
ing 1U EIA 19” rack mount chassis which may be rack, wall or
shelf mounted. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC and/or DC
fixed or PTZ cameras when utilizing Altronix HubWayAv, HubWayDv or HubWayDvi Video Balun/Combiners. 
In addition, the unit features individually selectable 24VAC or 28VAC PTC protected outputs with surge suppres-
sion. An optional HubSat4D Passive UTP Transceiver Hub with Integral Camera Power can be used as an accessory 
module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the
HubWay8D. In addition, the HubSat4D provides power to these cameras locally to eliminate the possibility of 
voltage drop associated with long cable runs.

• 115VAC 50/60Hz, 1.5 amp.

• Eight (8) channels of video over twisted pair

up to a distance of 750 ft. per channel.

• Eight (8) 75 ohm video outputs.

• RS422/RS485 data inputs.

• Individually selectable 24VAC or 28VAC power 

outputs with OFF position.

• Unit provides up to 1 amp max. per channel not to 

exceed a total of 5 amp (150VA) maximum current.

• PTC protected outputs are rated @ 1 amp 

per channel.

• Surge suppression.

• AC input power indicator.
• Eight (8) individual power LED indicators.

• Illuminated master power disconnect circuit breaker

with manual reset.

• IEC 320 - 3-wire grounded line cord (detachable).
• Unit can be rack, wall or shelf mounted.
• 1U EIA 19” rack mount chassis.

• Optional HubSat4D allows transmission of up to 

four (4) video signals over a single CAT-5 or higher
structured cable.

• Video Balun/Combiners:

- HubWayAv - for use with 24VAC cameras.
- HubWayDv - for use with 12VDC cameras.
- HubWayDvi - for use with 12VDC 

cameras without isolation.

- HubWay8CD: 12.3 lbs.
- HubWay82CD: 13.0 lbs.
- HubWay83CD: 13.5 lbs.

Eight (8) Channel Passive UTP Transceiver
Hub with Integral Camera Power
HubWay82CD

Eight (8) Channel Passive UTP Transceiver with 
eight (8) HubWayAv Video Balun/Combiners

Eight (8) Channel Passive UTP Transceiver with 
eight (8) HubWayDv Video Balun/Combiners

Rev. DSHubWay8CD - K25H

UL Listed for Commercial CCTV Equipment
(UL 2044).

CUL Listed - CSA Standard C22.2 No.1-04,
Audio, Video and Similar Equipment.